The small sentry allows you to install the system for 30 computers at the same time.

Note: This article is applicable to LAN users who use the normal restore card or software restore protection.
Because ordinary restore card or restore software does not have network maintenance function, users Will often encounter the system, the software needs to be upgraded, the recovery card is not working, the computer needs to be re-protected and other issues, maintenance will make network management staff more headaches. Network administrators often use Ghost software to perform clone recovery through the network. The downside of this approach is that it only recovers the primary partition data and is very time consuming. The author currently uses the small sentinel network copy software to simultaneously perform network copying of multiple computers, greatly improving work efficiency.
1.Small Sentinel
Small Sentinel Network Copy Small File
Software Version: 2.0.1 Beta Software Size: 41KB
Software Nature: Commercial Software Applicable Platform: DOS
Download URL : http://www.sentry.com.cn/sentry/chinese/download/wlkb.zip
Small sentinel network copy software is to achieve the entire LAN copy, as long as you select a computer as a transmitter, Other computers as receivers can complete network copying of multiple computers in dozens of minutes. The content of the receiver is exactly the same as that of the transmitter. It can be put into use after changing the computer name and IP address after restarting, especially for schools and Computer room and internet cafe in a computer training center.






















2. Software operating environment requirements
There are two important conditions: one is more than 16MB of computer memory; the other is a network card with PackDriver tool software; for example: NE2000, D-Link 220, D-Link 530, Common network cards such as Rtl 8029 and Rtl 8139.
Small Tips
PackDriver tool software is generally available in the NIC driver disk provided by the manufacturer. The file name may be: De22xpd, Rtspkt, and the suffix is ​​*.com file. The way to identify this file is to run the program under pure MS-DOS, such as Rtspkt.com 0x60.
3. Network copy handles
Step 1: Boot DOS system, it is recommended not to load XMS/EMS memory management program;
Second step: Load DOS network card driver provided by network card manufacturer;
Three steps: Run the small sentinel XSBNet.exe, the picture shown in the figure appears, the sender selects the sender, press the Enter key to confirm and the picture shown in the figure appears, waiting for the receiver to access;
Step 4: Receive Run XSBNet.exe, use TAB key to select the machine as the receiving end, press Enter key to confirm and wait a few seconds to connect to the sending end as shown in the figure;
Step 5: Wait for all receivers to connect and send After the machine, press the Enter key on the sending end to start sending data as shown in the figure, and the receiving end will synchronously receive the data as shown in the figure. Once the receiving end progress bar and the sending end progress bar are not synchronized, it indicates that the receiving end has dropped the line. Need to resend.































Flexible, compatibility is good, just need to run the IPX protocol under DOS, and the IPX driver of the network card is not easy to find, the configuration is slightly more complicated. Download URL: http://csweb.myetang.com/