How to open SATA hard disk AHCI mode from Win10 system

AHCI English full name: Serial ATA Advanced Host Controller Interface, which is a standard interface mode jointly developed by many companies, and for SATA hard disk users under win10 system, open this Mode can increase the reading speed of system files, but to open AHCI mode, you must adjust the AHCI mode through bios before installing win10 system. If the user does not open this mode, it may cause the win10 system to fail to start. So how can I open AHCI mode under win10 system? Let's look at the operation method that Xiaobian brings to you!

Open AHCI, please refer to the following steps, this method does not need to modify the registry:
1. First, add the Win10 security mode to the system boot menu.
2, restart, check whether the menu has been added normally, and try to enter the safe mode, to determine that it can enter normally.
3, restart the computer, press the keyboard shortcut to enter the BIOS settings. Different brands of computers enter the BIOS settings differently, generally F1, F2, F10, Del and other buttons.
4, find the hard disk controller mode setting option in the BIOS (find the setting options including SATA, IDE, AHCI), change the hard disk mode from IDE to AHCI.
For example, when a computer starts, press F1 to enter the BIOS, then select Devices→ ATA Drives Setup→ Configure SATA as→ AHCI, as shown below, and finally press F10 to save and exit the BIOS.

1. Save changes and restart the computer. Be sure to enter safe mode first.
2, after successfully entering the safe mode, restart the computer, select normal startup, under normal circumstances can start normally, and thus complete the switch of the hard disk mode from IDE to AHCI.
Through the above method, we can switch the SATA hard disk from IDE mode to AHCI mode under win10 system. For users who have this need, you can use this tutorial to try