Win10 open ahci can not boot how to do SSD open ahci can not boot solution

It is well known that SSDs are only 4K aligned and can be used to achieve maximum SSD performance when AHCI mode is enabled. However, a small computer equipped with a solid-state hard disk, after installing Win10, can not be properly booted. For the solid state hard disk to open ahci can not boot, Xiaobian encountered less, this time encountered such problems, but also tried a lot of methods to solve, after finally know the reasons and solutions, the following for everyone to share the small series Solution.

Win10 open ahci can not boot how to do?

The SSD of the SSD can not be turned on. The final result is mainly due to the incompatibility of the SSD. The solution is to update the SSD driver. The specific method is as follows.

1, restart the computer, press F8 to enter the startup settings, then press the number [5] on the keyboard to select “Start the security mode with network connection”, as shown below .

2, then enter a Win10 security mode with network connection, in this interface can still be networked, at this time we download and install the driver detection installation software in the computer, such as the familiar driver wizard Master Lu can do it.

3, for example, Xiaobian installed the driver wizard software, and then open, then detect the hardware driver, and then generally see, the solid state drive will have available driver updates, download and install the update driver.


4. After the driver update is completed, you can also go to the device manager to check if the SSD driver is normal.

After waiting for the installation of the SSD driver, restart the computer, and then enter the system normally, you can successfully enter the Win10 desktop.

The above is the computer's Pepsi network Xiaobian recently encountered Win10 SSD open ahci can not boot solution, I hope to help everyone. For this reason, it may be that the installed SSD is not a well-known brand model, resulting in the failure to install the SSD when the system is installed.

Guess what you like: How to turn on AHCI mode to avoid blue screen Open AHCI mode of hard disk