WIN7 Desktop Cooling Tips

When using a computer, the heat problem often plagues us. This tutorial introduces you to the WIN7 desktop using power management to drop the temperature.
First set the power scheme in <;Control Panel All Control Panel Items Power Options”.
Figure 1 With the system generally has high performance, balance, energy saving three programs.

The high performance is not much, generally only used in the CPU full, such as full load games or applications Etc., used to save the CPU to switch high and low frequency delays and CPU temperature changes caused by fan speed changes.
Balance is the default setting. The CPU frequency decreases as the system load increases, and the CPU fan speed also accelerates or decelerates with the temperature change caused by the CPU frequency change.
Energy-saving mode, I used to just leave the computer before, when the CPU frequency, minimum, fan is the lowest, of course, the computer power consumption is also the lowest, but do not like its built-in hard disk after 20 minutes off and passive fan I will customize a 26% balance plan instead. I will be a manual 26% program when downloading at night.
About 76% of the figure 60% 26% is the power plan I created on the basis of balanced analogy. My computer usage is manually adjusted, the purpose is to cool down, save power, reduce CPU fan noise. When the system defaults to balance, although the balance power management mode management is not much, many times the system is for the computer faster, such as opening a lot of software in the background at the same time. Or webpage, and we don't care about opening time, that time is just to look at the news, but the CPU is really full of help to save us unnecessary time, for example, I am just editing the postback, I am forced to use 26% power mode, CPU Temperature and fan noise have been minimized, and when watching HD, it will force the CPU 26% and so on because of the graphics card acceleration.
There is not much to say how to set it up.

Second, set the power plan shortcut, so that the desktop call
A power scheme is made as shown above, but how do we quickly call these power solutions on the desktop? The control panel is annoying, and the powercfg -list command is used.
Figure 3

Shortcut before: C:WindowsSystem32powercfg.exe setactive plus GUID value
Three, why my AMD440 can only be set to 76% 60% 26%, in AMD Inside the CCC management panel of the graphics card, there is a CPU performance, which is shown in the figure (other models CPU should be unable to test the accessory problem temporarily):
Figure 4

In the past, when using ATI graphics card under XP ATITOOLS used this overclocking tool to customize the graphics card core and memory frequency, friends with a discrete graphics card can also be combined with the next
Finally put a my AMD boxed fan down pressure blow, I directly added a CPU The chimney draws air from the 38 degree chassis side panel air outlet, although there is no feeling, but my heart is good, you can try.