Windows 7 blue screen code display and solution

There are many types of system failures, blue screen is one of them, but the status of blue screen is also a lot, and some code specifically indicates such failure. Regarding the blue screen of Windows 7, Vista and other systems, there have been many articles discussed before, but they are all common problems of screening. Today this article is a complete book. I hope everyone will not have a headache. After the article is collected, it can be checked.

I. Blue screen meaning

1. Fault check information

***STOP 0x0000001E(0xC0000005,0xFDE38AF9,0x0000001,0x7E8B0EB4) KMODE_EXCEPTION_NOT_HANDLED ***

The above line explains:

The first part is the Stop Code, which is STOP 0x0000001E, which is used to identify type errors that have occurred.

The second part is a set of four numbers enclosed in parentheses, indicating random developer-defined parameters (this parameter is incomprehensible to the average user, only the driver writer or the developer of the Microsoft operating system) Only understand).

The third part is the wrong name. The first line of information is often used to identify drivers or devices that produce errors. Most of this information is very succinct, but the stop code can be used as a search term in the Microsoft Knowledge Base and other technical materials.

2, recommended operation

The second part of the blue screen is recommended information for the user. Sometimes the recommended action is just a general recommendation; sometimes it shows a hint related to the current question. In general, the only advice is to reboot.

3, the debug port tells the user whether the memory dump image is written to the disk, use the memory dump image to determine the nature of the problem, and tell the user whether the debug information is passed to another computer vendor And what port was used to complete this communication. However, the information here does not make sense to ordinary users. Sometimes the Security Section can smoothly find out which production team is the problem. It will clearly report which file was wrong in the first part, but often it can only find a rough range, and it is impossible to clearly indicate the problem. Since the factory was completely forced to stop, only the reorganization was started. Sometimes, the production team realized the mistake and did not repeat it. But sometimes it still tries to grab parts, so the factory leader has to repeat the downtime decision (can't start and display blue screen information, or blue screen again when doing the same operation).

Second, Windows 7 blue screen processing method

Windows 7 blue screen information is very much, can not be fully explained in an article, but they are often concentrated on incompatible hardware and drivers Software, viruses, etc. with problematic programs should first exclude the following schemes when encountering blue screen errors.

1. Restart

Sometimes a program or driver makes a mistake, and after rebooting, they will be rehabilitated. (Note: See 7. Checking the stop code at this time.)

2, new hardware

First of all, you should check whether the new hardware is plugged in. This problem that many people ignore is often caused by many inexplicable failure. If you are sure there is no problem, unplug it, try another slot and install the latest drivers. Also check the hardware compatibility category of the Microsoft website to check if the hardware is compatible with the operating system. If your hardware is not in the table, then you can get a query from the hardware manufacturer's website or call them.