Win7 restart blue screen prompts beginning dump of physical memory error code how to do

Win7 system, open a program, when suddenly on the restart, then blue screen appears, also suggests "beginning dump of physical memory", the specific phenomenon as follows:

Win7 blue screen causes and solutions: < Br> 1, the memory strip contact is not good or the compatibility is not very good
Solution: Unplug the memory stick and use the eraser to rub the gold finger and then try to install it back, not yet, exchange the memory slot position and try to insert it back;
2, poor board contact or quality problems caused the equipment to run unstable
Solution: Shut down all hardware re-plugged to avoid virtual connection;
3, poor hardware compatibility
> Solution: This situation is common on non-branded assembly compatible machines. There is no good way to know what to do, just change it.
4. The poor heat dissipation of the computer causes the CPU or graphics chip to overheat and crash. There are hardware design flaws, such as some recalled graphics cards or computer components.
Solution: Thoroughly remove dust to enhance the heat dissipation of the machine, but not change the fan (heatsink);
5, hard disk bad track
Solution: Detect and try to repair bad sectors of the hard disk, but repairing the bad tracks of the hard disk will destroy the data of the track and its adjacent sectors. Please make a backup of the data before the bad track repair of the hard disk to reduce unnecessary data loss;
6, if there is a motherboard diagnostic card
Solution: It is recommended to plug in, start running test, it can not solve , you need to find after-sales or professional repair.
The above is the introduction of the blue screen prompting the beginning of the error of the error code of the Win7 system after the restart of the full content of the solution, do not have to worry about the blue screen failure problem, according to the above method to check.