Win7 network connection is not up and prompts error 797 solution

Win7 system often has problems with network connection, the error code shows 797, most likely NIC problem or router setting error. This article will introduce the Win7 network connection is not the wrong 797 solution.

First, the reasons for analysis:

797 error is usually a computer adsl moden connected device is not preventing the connection problems found, leading to the adsl modem and LAN connection fails, creating When the connection was dialed, an incorrect connection was created.

Second, the solution:

1, first check the computer and cat's power and power cable. Check the properties of the network and the protocols related to raspppoe are installed correctly, and bind them to the relevant protocols.

2. When detecting the exclamation point or question mark on the NIC driver, set it to enable and check the properties of the dial-up connection.

3, check whether the connected device uses an isdn channel-adapter name (xx) device, if it is, the device is empty, all will not be connected to the network error 797. You can cancel your device and use the correct pppoe device to recreate it, or you can recreate the dial-up connection.

4, if there is a problem with the TCP/IP protocol, if there is a backup, you can restore it, or reinstall the relevant protocol, if the problem is still unresolved, you can only do the system.

The above is the Win7 network connection is not the wrong 797 solution, if the above methods can not be resolved, then you can only call the network management.