Win7 system needs to press F2 to boot. How to do

  

When the computer is turned on, it stays on the startup screen and displays the following English prompts:

Press F2 to continue, DEL to enter SETUP

Translate to Chinese means: press F2 to continue, press DEL to enter the setting interface. (Some motherboards may prompt to press F1 to continue)

Case 1: The computer does not have a floppy drive or floppy drive failure

1. The computer does not have a floppy drive or floppy drive failure, but it is set in the BIOS. Floppy drive, this situation will lead to F2 prompts.

2. In most cases, you only need to restore the BIOS default settings to restore normal.

3, some older motherboard default settings will also open the floppy drive, then enter the BIOS, please select the first "Standard CMOS Features".

4, after entering, "Drive A" is set to "None", "Floppy 3 Mode Support" is set to "Disable",

5, return to the BIOS settings main interface, Select the “Advanced BIOS Features” setting item and press Enter to enter.

6. Set "Boot Up Floppy Seek" to "Disabled".

7. Press F10 to save, ESC key to exit BIOS setup, restart the computer.

Copyright © Windows knowledge All Rights Reserved