Win7 computer input 192.168.1.1 address can not open the router interface how to solve

Win7 computer input 192.168.1.1 address can not open the router interface how to solve

The specific method is as follows:

1, confirm the router default login address is 192.168.1.1;

Causes 192.168.1.1 to open and can't get in. It is very likely that the default address of your router is not 192.168.1.1. You can check the address of the router from the bottom of the router is 192.168.1.1.

Note: Some routers open the default address is 192.168.0.1

2, ping 192.168.1.1, the default address of the input router is 192.168.1.1 no problem, we can first ping Give it a try. First press the shortcut key to open the Win7 system's running dialog box, enter cmd to enter. In the open dos command line, type ping 192.168.1.1 and press Enter. At this point, you can see that the network is unreachable. 192.168.1.1 can not be opened to open;

3, replace the network cable. According to step 2, we know that the network is different. We can find a good network cable instead of the network cable under use. After the replacement, I will ping 192.168.1.1 again. See if you can ping the same;

4, set to automatically get ip, when the network shows the connection status is no problem, see if you specify the ip address. We open the Internet protocol properties to view, set to ip for automatic acquisition, DNS server is also automatically obtained;

5, look at the network cable plugged into the wrong jack, the following is to see if you use the network cable Plug it into the corresponding cell correctly. Do not plug the end of the computer into the WAN port. Connect the computer's network cable to the LAN port;

6. Reset the router and confirm that there is no problem. Let's restore the factory settings of the router. There is a reset reset button behind all routers. After pressing for 10 seconds, the router can be restored to factory settings. Specific can view the manual;

7, try ping 192.168.1.1 again. Hey, sure enough, pinged, these 192.168.1.1 can be opened;

8, to enter 192.168.1.1 try, see can still open 192.168.1.1 now. As shown below. Once set, you can open 192.168.1.1 and go in.