Win7 system LAN how to grab the network speed

In order to enable the network to be effectively used, the use of the local area network is favored by the majority of users. Although it is possible to access multiple users without restrictions in the same local area network, the network speed will be dispersed. Users who use the Win7 system react to their own cards when playing games under the LAN, because many people are using the network, which makes their games and movies very uncomfortable. How to do it well? How to solve such problems? Let's take a look at the Win7 LAN to grab the network speed.

The method is as follows:

Method 1: Limit the LAN speed through the router.

1. We can limit the network speed of other computers in the LAN through the “speed limit” provided by the router itself, thus indirectly increasing the speed of the computer. To do this we need to know the IP address of our computer.

2. Open the “Run” window (press Win+R to open it), type “CMD” and press Enter.

3, in the "MSDOS" interface that opens, enter "ldconfig" and press Enter to view the IP address of the machine. As shown in the figure:

4, log in to the router background management interface, switch to the "Broadband Control" tab, check the "Enable" option, and all IP addresses except this machine. Set “Download& rdquo; speed, click “OK” As shown in the figure:

Method 2: Use “Jusheng Network Management" to implement a variety of network speed limiting strategies.

1. When you run the program for the first time, you need to create a “monitoring network segment”, just click the “Create network segment” button to create a monitoring by wizard. network segment. Select the monitored network segment you have created and click the “Start Monitoring” button.

2, in the main interface of the open program, click the "Configure Strategy" button, and in the pop-up window click on the "New Strategy" button to create a name called "LAN to grab the network speed & rdquo; new strategy.

3, in the pop-up "Edit Strategy" interface, you can set the appropriate restriction policy according to the actual situation of the current LAN, such as Xiaobian here limited "P2P download", "ldquo; See web video & rdquo; & “ P2P video & rdquo; and other operations.

4. After the policy is set, click “OK> to save the settings. Click the drop-down list on the right side of “Enable Control" to select the appropriate type based on the LAN mode. Such as "gateway" mode.

5, finally, when all the hosts on the LAN are listed, right-click the computer to be restricted, select “ld to assign the policy to the selected host” from the right-click menu, and then use the previously set policy. Just fine.