Win7 system computer installation and connection of two routers to solve the problem of insufficient network

Many friends use the notebook win7 system to connect to the network when they often encounter the network is not enough. Some people ask if the win7 system computer router can install one and then connect a router, then it can solve the problem of insufficient network. So, can this idea be realized? The following small series will bring you a solution tutorial link for everyone to understand.

First, set the first router: (as the main router)

One end of the network cable is connected to the router, and the other end is connected to the computer network port.

1. Open a browser, enter 192.168.1.1, enter the username: admin, password: admin

(The IP of the general router is 192.168.1.1, username: admin, password: admin

It can be seen next to the router device or at the bottom, generally written.)

2. Click the quick guide and follow the prompts.

Interface Type: pppoe

Enter the Broadband Account Number and Password

3. Select the DHCP Service menu and enable the DHCP service.

After setting, connect one end of the network cable to the LAN port of the cat and one end to the WAN port of the router.

Second, then set up the second router (as a switch)

One end of the network cable is connected to the router, and the other end is connected to the computer network port.

1. Open a browser, enter 192.168.1.1, enter the username: admin, password: admin

(The IP of the general router is 192.168.1.1, username: admin, password: admin

It can be seen next to the router device or at the bottom, generally written.)

2. Select the DHCP service menu and turn off DHCP.

3, select the LAN port, enter 192.168.1.100, as long as the IP of the first wireless router is not the same

4, after setting, use one end of the network cable to connect the LAN of the main router Port, the other end is connected to the LAN port of the secondary router

Note: WAN of the secondary router

Related reading:

How to open the management page of Win7 router? Win7 open management of the router Page method

The above is the introduction of the win7 system computer installation and connection of two routers to solve the network is not enough to use the solution, in fact, the setting method is relatively simple, not everyone is so difficult, I hope the above tutorial Content can help everyone.