When prompted for Win7 partition, there is not enough space to complete this operation.

When prompted for Win7 partition '' There is not enough space to complete this operation

Resolve steps:

1.Windows key+R, Open the Run dialog box, type: diskpart #Enter Windows' own disk management program to enter the DOS window: DISKPART> 2. Type: list disk #Select to view the connected hard disk under this computer, it will display as follows: Disk ### Status size Available Dyn Gpt -------- ---------- ------- ------- --- --- Disk 0 Online 112 GB 29 GB 3. Type: select disk 0 # At this time, pay attention to which hard disk area you want to type. If there is only one, type select disk 0. 4. Type: conver dynamic # Make the hard disk become dynamic! This is the most critical, press Enter to go to the Windows partition management interface will see the original green, blue minutes will become brown 5. In the Windows partition management interface, you can normally partition the DOS interface according to your original normal operation. For reference DISKPART> list disk disk ### status size available Dyn Gpt -------- ---------- ------- ------- --- --- Disk 0 Online 112 GB 29 GB DISKPART> select disk 0 Disk 0 is now the selected disk. DISKPART> conver dynamic DiskPart has successfully switched the selected disk to a dynamic format. DISKPART> copy, vista operation, but Win7 is also a Vista kernel, it should also be able to operate, try to see