When Windows 7 can't enter the system to back up those things

The first backup after installing the Windows system has become a tradition. Whether it is installed in the computer city or install the computer itself, after installing Windows to get a backup, it is quite quick and convenient to restore when the system fails. Under the latest Windows 7, whether it should be a system backup, how to perform a system backup, in addition to the backup system, there are other situations that need to be backed up, which is what we are going to explore today.

Backup Windows 7, choose Ghost or the system comes with?

After installing Windows 7 and installing the commonly used software, you should make a timely backup of the system. Although the probability of Windows 7 failure to enter the system has been greatly reduced, but sometimes it will inevitably encounter quite strange system failure, this time instead of studying for a long time, it is better to restore faster, then there are friends to ask, backup Windows 7 Or use Ghost?

●Select the destination of backup

Ghost backup: Backup is fast, lack of function

mentioned backup, we first think of Ghost. Ghost's magic software can be said to change the installation and use of XP system. With the launch of Windows 7, various Ghost-based backup software also quickly launched a version for Windows 7, which is also very convenient to use.

It is recommended that you use the "Vista One-Click Restore 1.3.6" software. Although the name is Vista, it is quite easy to use in Windows 7. After downloading, please note that during the installation process, you will be prompted to set the default home page. Do not sneak open the software to switch to the basic settings. First select a location to store the backup file, click on the right side of the "Backup Information" It is recommended to select the last partition or store it in a large-capacity mobile device, because the volume after Windows 7 backup is relatively large; then select the partition that needs to be backed up, just click on the previous partition number, the setting is completed, click OK Start the backup. In the advanced settings, we can also make more detailed settings for backup and restore. We can choose to display the display time of the selection menu, or choose the compression ratio of the backup. If you think that the backup takes up too much space, you can choose "low speed backup high. The compression ratio", of course, will take more time to back up.

●Detailed settings

System comes with backup: real-time operation, more freedom of operation

As a brand new system, Windows 7 restores in system backup There has been considerable progress. Not only the system restore function, Windows 7 also has a backup function similar to Ghost, which can directly restore the system. Compared to Ghost, the system's own features can do other work during backup, and you can choose the backup content at will, which is much more flexible than Ghost.

Backup Real-Time Diversification

To perform a system backup, first enter the "Backup and Restore" option in the Control Panel, then select the "Create System Image" button on the left to start the backup. You can choose to back up your system to other partitions on your hard drive, burn it directly to a disc or back up to a LAN computer.

●Select backup location

●Select backup content

Under the default settings, backup content is more, volume It is also relatively large, we can click the "Set Backup" button to select the backup content, such as whether to back up the library file. In particular, the backup that comes with it is not just a backup of the system partition. If you are used to installing the software in a separate partition, you can also choose to back up. Then you don't need to reinstall the software when you restore it. This is The biggest advantage compared to Ghost.

Three kinds of restoration methods

Ghost restores the system after backup, usually adding a boot item, and then entering DOS for recovery operation, sometimes it will inevitably lead to the failure of the boot menu. And using Windows 7 backup and restore, will not modify the system boot items, it is much simpler.

If you can enter the system, we can directly enter the backup and restore function to restore, also enter the "backup and restore" option, select "restore".

●Recovering the system image

If you have not been able to enter the system, we can press F8 at startup to enter the advanced boot menu and select the “Repair PC” option. After a while, we can enter a restore interface called "Winre". You can use this function as the Winpe that comes with the Windows 7 system. After entering the "System Recovery Options", select "System Image Recovery" and select We back up the good system image and restore it.

Tips: If you can't access the advanced boot menu, we can first create a bootable CD containing the "System Recovery Options" by clicking "Create System Recovery Disc" in the "Backup and Restore" option. Can achieve the same purpose.

●Create Winre Recovery CD

In general, these two backup methods have their own advantages, of which Ghost backup is faster, Windows 7 comes with Backups are more convenient to use, and how to use them can be selected according to your own situation.

What other situations need to be backed up?

In fact, the backup and restore system is very simple, many friends will, but in Windows 7, backup and restore is not just for the system, in our forum, I also encountered a lot of backup and restore in Windows 7 Go to the question and see if you have such troubles.

Change Game Archive Directory Backup Game Archive

Backing up game archives in XP is very simple. Generally, game archives are saved in "My Documents" under the game named folder or directly Saved in the game directory, but a bit different under Windows 7.

For example, "Plants vs. Zombies" game, the game archive in XP is in the "userdata" folder of the game installation directory, overwriting it will return to the previous file, but in Windows 7, The game archive is in the middle, and you must display hidden files to view. If you can't find the archive of a game in Windows 7, you can use this method to backup.

●View archive location

In addition to games like Spore, no matter what the installation path is, a huge archive file will always be generated on the system disk. After installing Windows 7, we can't import the archive. We can use the method of replacing the archive file path to achieve the purpose of reading the archive.

First ensure that the system disk is in NTFS format, and find another disk partition with a large remaining space, also in NTFS format (assuming E disk here). First close the game, then cut all files under the system disk: Documents and Settings your system user name Application DataSPORE to the root directory of the D drive, then enter "compmgmt.msc" in the run window of the start menu to open " Computer Management, select "Storage" on the left -> "Disk Management", in the disk partition icon that appears in the lower right, right click on the E drive icon, select "Change drive name and path" in the pop-up menu. In the pop-up dialog box, select "Add", select the system disk that has become an empty folder: Documents and Settings current your system user name Application DatASPORE, note that the folder must be empty, otherwise you can not choose, all the way Click "OK" to complete without rebooting the system.

The system cannot be started after adjusting the partition

After installing Windows 7, the system disk space is found to be very small, so the software is used to expand the system disk, and the space becomes larger. However, some friends found that even after the expansion, the system could not get in. What should I do?

There are most of these problems that should have caused a mistake in the partition table after many adjustments. How should we solve this problem? You can perform partition restore in Winpe. Generally, Winpe will be equipped with DiskGenius or PTDD. DiskGenius can use the rebuild partition table function. When PTDD starts, it will prompt you whether the scan error is fixed. Back up the registry first. If it is not a partition table problem, then you can press F8 to enter the advanced boot option at startup, select "Repair Computer", and then enter the command prompt to execute two commands: chkdsk c: /f and bootsect /nt60 c: /Mbr. Here C: indicates the drive letter of the system disk, and replaces it with the corresponding system disk drive letter according to your own computer.

●Rebuilding partition table