Win8 computer blue screen failure error code 0x000000f4 how to solve?

Everyone has encountered a sudden blue screen of a good computer, and then a few lines of code appear at the bottom of the computer. But some people can use that code to get an idea of ​​what went wrong with the computer. Recently, users of the Win8 system suddenly have a blue screen when using the computer, and the error code is 0x000000f4. How should we solve such problems? Now Xiaobian will talk to you about the Win8 computer blue screen fault error code 0x000000f4 solution.

The steps are as follows:

1. Analysis reason: STOP: 0x000000F4 The message given by the stop code is: memory access error, four sets of numbers are memory addresses, this problem is only recently It is still from the ghost operating system, if it is only recently, then use ghost to restore the image again, if it is from the ghost, it is recommended that you install it again in the current partition state.

2. When you encounter a blue screen, press and hold the power button to turn off the operating system. When you turn it on again, press F8 to enter the selection menu and enter safe mode, which may improve. Then restart the computer and continue to press the F8 key. At this time, you can choose to use the [“last correct configuration"start Windows] option to solve a problem such as the newly added driver does not match the hardware.

3, solution ideas:

If the hard disk has bad sectors, it will cause slow detection. You can pay attention to the abnormal sound when the hard disk is running. If there is any, the hard disk should be There is a bad track, so the system will use the damaged file, it will be blue screen of death, it is recommended to format the hard disk after low-level and then re-partition, there is a certain hope to restore the hard disk, or use software to block bad sectors. Or install the operating system to the D drive. There is no problem with the motherboard, BIOS and memory. The HDTune software uses the HDTune software to check whether there is a bad block at the beginning. If it is, divide it into one area and hide it.

4, error analysis:

0x000000F4 stop code may also be the kernel layer to check the system for a storm, such as: a device does not release the interrupt after the completion of the operation, usually this It is caused by a defective driver. If you know which devices have been updated recently, you can try to uninstall the problem driver, back up the driver before, and return the driver.

5, Solution:

Upgrade or uninstall the latest installed hardware drivers. If the BIOS is the latest beta, the beta is unstable and it is best to use the official version.

6, details can be entered at the beginning → run: EventVwr.msc, press Enter to open the event viewer, pay attention to check the system log and the application log marked the wrong item.

After 1 blue screen, find the error file with the extension dmp under the minidump folder on the system disk (usually C drive).

2 extension dmp file needs to use the source code to debug WinDbg software to view (Microsoft official website can download the software)

7, in addition, you can also go to the Microsoft official website knowledge base Check the relevant information, compare it, identify it, and find a solution.

About the Win8 computer blue screen failure error code 0x000000f4 solution to everyone to introduce it here; the computer came out of the blue screen, do not worry, first find out where the problem is, and then solve it, so No, it’s ok.