How to set up static ip win8?

win8 static ip setting method steps

win8 set static ip tutorial everyone can come to understand, some friends do not know how to set static ip win8, in fact, the steps are very simple, if you want to set or encountered If the setup fails, you can refer to the steps below.

1. First check if your NIC driver is in good condition. If the NIC driver is not working properly, you may need to reinstall the NIC driver to see if your network is working properly.

2. If the NIC driver is working properly, it is recommended to use the following method: WIN+X key combination , find and open the device manager;

3. After opening, find the following options:

4. Find a network adapter (depending on each person's network adapter, some computers have wireless and Wired Adapter) Take the wired adapter as an example:

5. Open the network properties and click Install —— Protocol, click Add —— Install from disk, browse to C:Windowsinfnettcpip.inf OK, then Select TCP/IPv4 installation;

6. If the problem persists, press “Windows+X”Open a command prompt (administrator) and enter <;netsh int ip reset” Enter. Follow the prompts to restart your computer to resolve the issue.

WIN8 System Manually Set Static IP Address Method Steps

Now, whether it is a desktop computer or a laptop computer, it is already available in most homes. When you access the Internet, you usually get the IP automatically through the router. Address, but because some personal needs need to use a static IP address, let me tell you how to manually set the static IP address of your computer.

1

Double-click to open the computer, press ctrl+F1 or click the hidden menu icon in the upper right corner.

2

Click on the -> Control Panel.

3

Click-> to view network status and tasks.

4

Click on &> Ethernet, select Properties, and double-click on the Internet Protocol version 4.

5

The IP address setting interface pops up, choose to use the following IP address and use the following DNS server address to fill in. (Setting can be done in the DOS window with the ipconfig /all command)

Precautions

When setting the DNS server address, it is usually the gateway of the local router.

The valid range of IP addresses can be viewed and set in the router management interface (you need to have a username and password to enter the router's background management interface).