Win8 shared wireless wifi to achieve mobile Internet access free flow tutorial

Win8 shared wireless wifi to achieve mobile Internet access free flow tutorial

Operation steps:

1. First confirm the wireless network card switch is on, the driver It has been successfully installed and the wireless network function is working properly.

Open the Control Panel --- View network status and tasks, click on the "Change Adapter Settings" on the left side, confirm that there is a "Wi-Fi" network connection. As shown below:

Right click on the desktop <; Computer" icon to select “Set" "Device Manager" or press “Windows" and “X” Key, select "Device Manager", confirm "Network Adapter" under the device with no exclamation mark, there is a wireless network card device and "Microsoft Kernel Debug Network Adapter", as shown below (different brands of different models of wireless network card The names are slightly different. The following figure uses the Atheros AR9285 as an example. If you do not have these two devices, please uninstall the existing wireless network card driver and reinstall the Lenovo website to provide the wireless network card driver.

If you have a down arrow icon, right click on this device and select On. As shown below:

If there is an exclamation point with "wan miniport", please refer to the note explanation.

Click the network icon in the task bar at the bottom right corner. If there are other network signals around, the wireless network card is available.

2. Determine if the network sharing related service is enabled.

Right-click on the desktop <;computer” icon, and then click "Manage"---"Services & Applications>;---"Service” (or press “ Windows key and R key", enter “services.msc”, click OK to open “service manager”), view "Internet Connection Sharing (ICS)" and "Remote Procedure Call (RPC)” Whether the service is enabled. If “manual"not" is running”, right click on the corresponding service <;start”;if “disable”, corresponding service right click on “property",“start mode&rdquo ; set to “automatic", click the "application" button, click “start”, then click “OK" to complete the setup.

3. Set up the bearer network.

Simultaneously press the Windows and X keys and select “Command Prompt (Administrator)”.

Enter netsh wlan set hostednetwork mode=allow ssid=The name of the network you want to create (in English) key=The password you want to set (at least 8 digits) Press Enter to set the ssid and password. (For example, netsh wlan set hostednetwork mode=allow ssid=mywlan key=12345678.)

Enter netsh wlan start hostednetwork and press Enter to start the bearer network.

4. Set up network share

Open Control Panel---View Network Status and Tasks---Change Adapter Settings

If the above command is created successfully, a message will appear. “Local connection*” behind a digital network connection. And the middle part will display the set wireless network name. As shown below:

In the "Ethernet", right-click and select "Attributes", click "Share", click the settings shown below, click the "OK" button to save the settings. .

(If you use a broadband connection for dial-up Internet access, please click "Select Properties" to set the share in the "Broadband Connection")

After the above operation is completed, the wireless network created by the mobile search "mywlan" , use the key “12345678” connection test.

The following is a batch file for automatically creating a wireless network, which can also be used. Set the network SSID and password. After saving, right-click this file and select “Run as administrator”. If there is no error, create a wireless network automatically, and then set up network sharing.

netsh interface set interface name="wi-fi" admin=disABLED

netsh interface set interface name="wi-fi" admin=enABLED

netsh wlan Stop hostednetwork

netsh wlan set hostednetwork mode=allow

netsh wlan set hostednetwork ssid=mywlan key=12345678

netsh wlan start hostednetwork

Remarks: Br>

1. If the network icon in the lower right corner is turned on, “Wi-Fi” is displayed as “Off”,

2. After entering the command, press “enter” and find “Change Adapter Settings”. There is no "local connection*" in the interface; first open “Device Manager" again to see if there is a "Microsoft Managed Network Virtual Adapter"; disabled, as shown below. If it is disabled, right-click and select “Enable”, then re-enter the command to create a wireless network. (Note: This virtual device appears only after the bearer network is created. It is normally hidden and invisible.)

If the above operation is completed, “Always connect*”, please open” Control Panel "-“System & Security"-“Windows Firewall", click on the left side" Allow Programs or Features via Windows Firewall", find the "Windows Communication Foundation" project, check to see if all are checked. After all check, click OK and try to recreate the wireless network.

4. If the mobile phone is connected to the created wireless network, but the webpage cannot be opened, firstly disable all the protection software installed on the computer or temporarily stop the protection, and then open “ control panel>---&ldquo "System and Security"---"Windows Firewall", click on the left side "Open or close Windows Firewall", here is temporarily set to off, then the phone and then re-open the page to try.

5. If the mobile terminal QQ can send and receive messages, but cannot open the webpage, other applications cannot be connected to the Internet. The DNS service function of the computer system may be abnormal. You can change the adapter settings in the <quo;Ethernet” ; or <;Broadband connection" (depending on how the network is connected) right click and select “Status”, click “Details”, record the “IPv4 DNS” information, manually set in the mobile network settings &ldquo ;DNS server" (domain name) address. For details on how to set up, please refer to the instructions provided by the mobile phone manufacturer.

You can also consult your local network operator for the DNS server address used. The following public NDS server addresses can be referenced: 114DNS (114.114.114.114, 114.114.115.115), Google Public DNS (8.8.8.8, 8.8.4.4), OpenDNS (208.67.222.222, 208.67.220.220). You can choose according to your region and the network operator.