Solve Win7 disconnected connection failure

When using the Windows
7 system, especially after WinXP system is replaced with Win7, there will be a disconnection failure, indicating that the local connection is limited or no connection. Most of this happens because the routing device does not have DHCP enabled, and the default setting for the system is to obtain an IP address automatically. Let's teach you to manually set the IP to solve the annoying problem of Win7 dropped.

Operation steps

1. Click Computer
Start button in the lower left corner of the desktop and select Control Panel.

2, click to view network status and tasks.

3. Select Change Adapter Settings in the tab on the left.

4. Right click on the connected network, for example, I am connected to the wireless network, I will choose the wireless network, properties.

5. Select the IPV4 protocol and click the Properties button.

6. Check the following IP address and fill in the following data. (Specific data is subject to availability)

IP address: 192.168.1.2

Subnet mask: 255.255.255.0

Default gateway: 192.168 .1.1

DNS Server (Main): 202.102.192.68

DNS Server (Deputy): 202.102.199.68