U disk WINPE, CD WINPE system installation diagram tutorial

WINPE is Windows
Preinstallation Environment (Windows
pre-installation environment) abbreviation, is based on running in protected mode Windows
XP personal version of the kernel, can be understood as a MINI-type XP system, almost the basic functions of the MINI XP can be achieved, many friends have contacted or used, online tutorial
There are also many, this article is mainly written to friends who are in contact with WINPE later, how to make their own WINPE system boot repair disk (U disk and CD).

There are two main WINPE versions on the Internet: the WINPE toolbox for the deep mountain red leaf and the WINPE modified version for the old peach. The latest versions are V32 and V0911.

Tianyuan recommends using a modified version of the old peach, because this version is the cleanest, because for many friends, using WINPE is more about maintaining the computer and installing the operating system
, so as long as Can enter the WINPE system, most of the repair operations can be completed. The deep mountain red leaf WINPE integrates many shortcut tools (including security, network, etc.), and the actual frequency of these tools should not be too high. If it is burned into a disc form, it is better to use the deep mountain red leaf. If it is a USB flash drive system, it seems better to use a clean WINPE. OK, this article will take the U disk WINPE (old peach) and CD WINPE (Deep Mountain Red Leaf) as an example to make the process of making WINPE system (of course, can also be made into a hard disk, then with the installation of operating system
almost No difference will not be discussed).

1, U disk WINPE production graphic tutorial

1, download the old peach WINPE modified version, load the virtual CD-ROM drive, then right-click to play or directly run the root directory SETUP PESETUP.EXE , will pop up the following picture:

Select the target object to be installed, 123 are hard disk installation, for ordinary users rarely need, here we do U disk WINPE, so first insert U disk (please note Be sure to back up the data on the U disk first, so select 4 and press Enter.

2, this time you will be prompted for the drive letter of the U disk (the U disk drive letter of the Tianyuan is G), and then enter the prompt U disk drive letter after the F, for example. Enter to confirm, as shown below.

3. At this time, the installation program needs to format the U disk and write the boot information. Press any key to start, as shown below.

4, here choose the file system for your U disk (generally choose FAT32 compatibility) and the volume label (Tianyuan input is BootXp), and then click "Start". As shown below.

5, confirm that the U disk data has been backed up, click & ldquo; is & rdquo; after the U disk will be formatted. We point to <; is ” start formatting, as shown below:

6, after formatting the U disk, pop up the following report, click “ OK & rdquo;.

7, pop up the following window prompts you need to write GRUB (Tianyuan Note: GRUB is a bootloader) to the U disk boot area, here you need to pay attention to the disk list box selection, do not The wrong choice, the number HD0, HD1 here is named according to the LINUX habit, you can easily determine whether it is to be written to the disk. If you don't modify the click list box. The check box below can be selected according to the needs. If it is the first time to do the U disk system or do not understand, do not select, and then click “ Install & rdquo;.

8, a CMD window will pop up, showing the following picture:

Pressing a button will close the CMD window and return to the above picture. Then click the close button in the image above. (The order to be noted here is: GRUB boot point “ install ”—— pop up CMD window by pressing any key —— return to GRUB boot window point "close”).

9, GRUB boot has been written, and then press any key to continue, as shown below:

10, start to set the password for WINPE startup, as shown below (Tianyuan set 111111) :

Set the Enter prompt to complete the password setting, as shown below:

Press any key to start copying the file to the USB flash drive.

After the copy is completed, as shown below:

The WINPE of the U disk version is completed. At this time, you can restart the machine and set it to USB-HDD in the BIOS. And restart the machine to see the WINPE interface. Since you can enter WIN XP, install the operating system, format, modify the original hard disk XP administrator password, etc., "I want to do it all".