Win7 system package detailed tutorial _Windows7 system packaging steps (detailed illustration)

There are many modified versions of the system on the Internet, such as the xx gardens of the year, such as x degrees, xx winds, etc. As veterans familiar with computers, they only use the pure version system. After all, the online modified version system Even if there is no virus Trojan, it will give you a bunch of things that you don't like. However, each time you reinstall the pure version of the system, you still have to install a lot of software you use. You have to do some system configuration to adapt to your own habits. Your home computer and company computer may encounter this problem. This time We can consider DIY a proprietary system, yes, this is to be packaged.

Many people think that making a package system is a very complicated and very high-level thing. In fact, after actually doing a package system once, you will find that it is not difficult to make a package system. As long as you have a certain computer foundation (installing the operating system, installing the software, and being able to use the commonly used application software), with a little care and patience, it is a breeze to make a packaging system of your own. Below, let's make our own Windows7 package system together.

First, the package preparation

1, Windows7 officially released installation CD (mirror) (not available here, everyone think of it)

2 Need to pre-install a variety of application software, such as Office /WPS, Photoshop, Win7 optimization master, etc., of course, as a support for soft media, plus flash browser and cool point.

3, UltraISO and Windows7 AIK. Windows7 AIK Simplified Chinese version can be downloaded from: http://download.microsoft.com/download/6/3/1/631A7F90-E5CE-43AA-AB05-EA82AEAA402A/KB3AIK_CN.iso

4, WindowsPE CD (preferably Windows7PE). Windows7PE CDs can be created using Windows7AIK or downloaded at the following address:

Second, install operating system and applications

1. Install Windows7 operating system.

There are four steps to install the operating system:

1 The operating system is best installed on the C drive. During installation (including installing applications and packaging later), it is best not to connect to the network. .

2 If you enter the serial number during the installation of the operating system, reinstalling the operating system after encapsulation will not prompt you for the serial number. Unless you want to make an OEM version of the package system, do not enter the serial number when prompted to enter the serial number during the installation process, just click “Next” to continue the system installation.

3 In order to keep the package system pure, it is best not to install the hardware driver after installing the Windows 7 operating system. Of course, installing the driver will not affect the system's packaging.

4 To avoid unnecessary errors and error reporting during the process of optimizing the system and installing the application software, UAC should be disabled and the error report should be closed after entering the system for the first time. The method for disabling UAC and turning off error reporting is as follows:

——Open“Control Panel", click “System & Security", select “Operation Center", click “Security" ;, find and click in the detailed settings of the expansion and click "Select your UAC level" under "User Account Control", and then adjust the slider on the left to "ld" in the pop-up dialog box; never notify & rdquo ;, then click & ldquo; OK & rdquo; you can disable UAC (requires restart system to take effect).

—— Next, click “Maintain", find and click on <;Check the problem report solution> in the expanded details of the setting>Settings> In the pop-up page, select “ Never check the solution (not recommended) & rdquo;, click “ OK & rdquo; you can disable the error report.

2. Install various application software that needs to be packaged.

It should be noted that the capacity of a normal DVD disc is 4.37G. In order to avoid the generated package file being too large to be burned to a DVD disc, the capacity of the system disc should be controlled when installing the application. Under normal circumstances, make sure that the system disk takes up less than 8.5G after removing the hibernation file (hiberfil.sys) and the page file (pagefile.sys). Once again, I hope that everyone can install the soft media Win7 optimization master, Rubik's cube and flash browser. This is the best browser for Win7:)

3, adjust and optimize the system and installed applications according to your preferences. And clean up the system for temporary files, junk files, and the registry.

It is necessary to pay attention to the adjustment and optimization, and the system may be unstable after cleaning. It is necessary to have a comprehensive understanding of Win7 optimization master, Rubik's cube and the items to be adjusted, optimized and cleaned up. Don't bring instability to the system itself because of adjustment and optimization, and bring these unstable factors to the new system after packaging. For example, Xiaobian will first use the Rubik's Cube to slim down the system.

Three, package

1, enable the Administrator administrator user account and disable the currently used administrator user account.

1 Right click on "Computer", click on "Manage" & rdquo; The system will pop up "Computer Management" interface. In the left pane of the “Computer Management” interface, double-click “Local Users and Groups”, and then click “Users” and the “Computer Management” interface will display all user accounts in the computer. The name is the same as the user name entered when the system is installed.

2 Right-click the Administrator user icon, click “Properties", in the pop-up Administrator Properties dialog box, delete the "Account is disabled" checkbox, and then click "OK" to enable Administrator. User account.

3 Next, right-click the administrator user icon currently in use, click “properties", in the pop-up admin user properties dialog box that is currently being used, select “Account is disabled” , click “OK" to disable the admin user account currently in use.

4After enabling the Administrator administrator user account and disabling the currently used administrator user account, restart the computer and the system will automatically log in using the Administrator user account.

2, the original system and application settings are converted to the default settings for all users (that is, each time a new user account is created, you can directly use the user account that has just been disabled to the system) And the settings made by the application).

1 Open “Control Panel"" "Appearance & Personalization", find and click “under the folder option“Show hidden files and folders”, in In the pop-up "Folder Options" dialog box, remove the "Hide Protected Operating System Files (Recommended)" check box, and then select "Show hidden files and folders", click “ ;OK” Make all files and folders on your computer appear.

2 Open the user folder C:Users of the system disk and you can see the folder corresponding to each user account.

3 The “AppData” folder and NTUSER.DAT, ntuser.dat.LOG1, ntuser.dat.LOG2, NTUSER.DAT{xxxxxxxx- in the folder (Maker) of the user account that has just been disabled. Xxxx-xxxx-xxxx-xxxxxxxxxxxx}.TM.blf, NTUSER.DAT{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}.TMContainer00000000000000000001.regtrans-ms, NTUSER.DAT{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}.TMContainer00000000000000000002 .regtrans-ms, ntuser.ini (if there are SciTE.sessio, global abbreviations.properties, also select), copy to the default user's folder (C:UsersDefault), if prompted during the copy process If the file or folder has the same name, click “OK” to overwrite or merge.

Previous 12 3 Next Read more