Xp system boot into the welcome interface, there are many reasons for the white screen and the solution

Some XP system users feedback, their own computer after booting into the welcome interface, there is a white screen situation, how is this going? Although the white screen problem is relatively rare, it will be a headache if it is encountered. In order to help users solve this problem, the following small series introduces you to the reason and solution of the white screen at the welcome interface of xp system.

fault reason: hardware problem

Solution:
encountered WinXP black and white should first think of a hardware problem, the hardware to conduct a comprehensive investigation.
1, re-plug the memory to see;
2, then check the hard disk has no bad sectors, if there are bad sectors can be taken for repair.

Fault Cause 2: Poisoning causes

Solution:
After entering safe mode, perform a full-scale check.

Fault Cause 3: It may be a problem with the graphics card installation or update the incompatible graphics card driver.
Workaround:
Use the driver wizard or remove the graphics card driver in safe mode, then enter The system is reinstalled.

Fault Cause 4: System Problems

Solution:
1, enter safe mode, move important content to non-system disk;
2, then directly select restore or heavy Install the system.

Related reading:
Winxp system blue screen after booting and the error code 0x0000000f4 solution
The above is the xp system boot into the welcome interface, there are many reasons for the white screen and the solution As long as we conduct a detailed investigation, I believe that the problem will be solved.