Win7 Ultimate system boot screen prompts press F1 to continue solution

When the Win7 Ultimate system is powered on, a prompt for press F1 to continue appears on the screen. You need to manually press F1 to continue. Every time you press the F1 button, you can enter the system normally. It is too much trouble. In addition to reinstalling the system, is there any way to solve this problem? In response to this problem, Xiaobian research has compiled a detailed solution for everyone, interested users to look at the solution together.

1. Open the computer and use the bios shortcut key to enter the bios interface. In the main column, find and move the cursor to the Floppy A floppy drive setting;

2, then press the Enter key to open the options interface, move the cursor to the Disabled item, press the Enter key and press the Save key (usually F4 and F10);

Description: If not To save the shortcut keys, use the left and right arrow keys to select the Exit section, then use the up and down direction keys to move the cursor to Exit & Save Changes and press Enter. In this case, the bios interface will have a shortcut to execute Save &. Exit Setup prompts, currently F10 shortcuts;

3, may also be caused by bios battery problems, just replace the bios battery and clean the battery slot.

The doctor is the introduction of the whole solution of the Win7 Ultimate system boot screen prompt press F1 to continue. After setting according to the above method, the boot automatically enters the system, no need to press F1 again.