Win7 system boot blue screen and prompt error code 0x0000002E reasons and solutions

Win7 system boot blue screen and prompt error code 0x0000002E phenomenon as shown below:

Cause analysis:

win7 system blue screen is a common fault, mainly caused by hardware, software, drivers and other factors, and the reason for this blue screen code 0x0000002E is mainly caused by parity errors in the system memory.

Win7 system boot blue screen and prompt error code 0x0000002E solution:

1, run the Win7 system diagnostic tools to check, especially the memory check;

2 Into the BIOS mode to disable the memory cache function;

3, you can also try to use "Safe Mode" to start the computer, if "Safe Mode" can start the computer, try to change to the standard VGA The driver, if it can't solve the problem, can also use other video adapter cards, "Fixed hardware list" listed in the financial video adapter card.

4, if there are newly installed hardware in the system, such as RAM, adapter, hard disk, modem, etc., may be caused by these hardware;

5, can also be restarted Computer, press and hold F8 to enter “Advanced Startup Options”, select “Last Known Configuration” and “Startup Item”;

6. Ensure that the system has the latest BIOS and the hardware device has been updated. Drivers.

The above is the reason for the blue screen of Win7 system and the error code 0x0000002E is introduced. The friend who has the same problem can try to solve it.