Win7 computer ip address how to set up to solve network problems

Sometimes there is a problem with the network, we need to set the ip address, but some users are not familiar with the Win7 system ip address settings. In fact, the Win7 system is similar to the Win XP system. Next, Xiaobian will introduce in detail how to set the Win7 computer ip address.

The method is as follows:

1. In the lower right corner of the computer, there is a network shortcut button, click on it, open a menu, and then select “Open Network and Sharing Center>;
< Br>

2, open a dialog box, here choose to change the adapter settings;

3, find your local connection, right click, pop up a menu, and then select properties;

4, open the properties dialog box, we chose & ldquo; ipv4 & rdquo ;, then click the properties button;

5, where check & ldquo; use the following ip address & rdquo; Then you can enter the ip address below, click the OK button;

6. If you are in trouble, you can set ip in the command and open the running window in the start menu; Br>

7. In the dialog that opens, type cmd and click the OK button;

8. In the command that opens, enter the code shown below

netsh interface ip set address "local connection" static 192.168.5.36 255.255.255.0 192.168.5.1 auto< Br>

The code means to modify the following information with the command line:

IP :192.168.5.36

Mask: 255.255.255.0

Gateway: 192.168 .5.1

Through the above method, we can set the ip address by ourselves. Although there are many steps, it is not difficult for friends and friends to operate step by step. After setting up, we can see the ip address we just set by looking at the ip address.