What if win10 takes up the hard disk? Win10 system disk occupancy rate or up to 100% solution

The problem that win10 takes up the hard disk is that many users who have changed to win10 have encountered it. In the Win10 system, the occupancy rate is 50% or 100%. This situation obviously will reduce the system running speed. It takes time to buffer after booting, and the damage to the hard disk is also great. Xiaobian brings you a comprehensive solution, I hope to help everyone, let's take a look:

1. Close the family group

Family group is important for taking up the hard disk one of the reasons. Some netizens reported that after the family group was closed, the hard disk usage rate dropped from 90% to 10%. This is not sensational. Because the home group is turned on, the system will continue to use the hard disk to copy file shares, resulting in a hard disk usage rate of more than 90%, affecting system speed. Most home computers do not need to share files to the LAN.

The following are specific solutions:

Control Panel - Administrative Tools - Services

Find “HomeGroupListener” Service, double-click to open or right-click on the "Properties" command.

In the pop-up properties interface window, click the Startup type drop-down box on the General tab, and the list that comes out selects “Disable”. Then click the “Stop” button in the service state, and click the “OK" button to save the settings.

Similarly, the same treatment is applied to the HomeGroupProvider service.

The number of disk reads and writes is greatly reduced after closing the home group

2. Turn off the automatic maintenance plan task

The automatic maintenance function of Win8.1 will occupy a higher level in the running state. The hard disk usage and CPU usage make the low-end computers in the configuration become extremely slow, and even unresponsive and deadlocked. However, we can optimize the hard disk with third-party optimization software. It is recommended to optimize it once every two or two months. The following is a specific scenario to turn off the automatic maintenance plan task:

Open the path: C:WindowsSystem32TasksMicrosoftWindows

Rename the folder “Defrag”Defrag.bak”

At this point, the automatic maintenance of the people disappeared, and the disk usage rate began to be normal.

3. Turn off the virtual memory

(Note: If the physical memory is below 2G or 2G, it is not recommended.) Solution!)

Win8/8.1 turns on virtual memory by default, and it dumps some of the application's memory to the hard disk to avoid insufficient physical memory. The low-end computer turns on virtual memory to improve operational efficiency. However, in the case of abundant physical memory, the use of virtual memory not only has no effect, but has a high disk usage rate of "side effects". Therefore, it is recommended that users with physical memory of 4G or more turn off virtual memory. The following is a specific settlement bill.

Right-click on “Computer” select properties, open and select “Advanced System Settings&

Click the Settings button in "Performance";

“Advanced", click on "Change" in the virtual memory, and "Automatically manage the paging file size of the drive", remove the checkmark, click on the following "No paging file", click “Set” And “OK”

4. Close IPv6

There are almost no ordinary users using IPv6 in China, but under Win8/8.1, IPv6 is enabled by default, which makes the computer hard disk occupancy rate high. The system is not responding, suspended animation, etc. Therefore, it is recommended that users who do not use IPv6 can completely turn off this "excessive" function. Here are the specific solutions:

Open Control Panel - Network and Internet - Network and Sharing Center - Change Adapter Settings

Select the Internet network you are using, right click and select Properties, as shown in the figure Remove the hooks and click OK to save

5. Close Windows Defender

After opening Windows Defender, Windows Defender will scan the system in its entirety, opening the folder will be very stunned, nothing more than nothing A high disk usage situation occurs. Windows Defender will automatically shut down after installing other anti-virus software. If you are a computer expert with enough experience and don't need to use any anti-virus software, the disk usage of Windows Defender will definitely be significantly reduced. Here are the specific solutions:

Open Control Panel - All Control Panel Items - Windows Defender