After WinXP starts, the monitor has no signal to see the startup progress bar. How to deal with

Recently, some WinXP users found that after starting their own computer, the display has no signal, and at startup, you can see the startup progress bar, and after startup, after startup The main unit is running normally and the hard disk light is also flashing. Today Xiaobian tells everyone how to solve this problem.

Solution:

1. Check if the monitor does not work because the monitor's refresh rate is too high.

Restart the system and press F8 to see if you can enter safe mode. If you can enter, please set the refresh rate of the monitor to a lower level:

Right click on the desktop and select “Properties” In the Open Settings window, select the "Settings" tab, click the "Advanced" button, select the "Monitor" tab, and set the refresh rate to 60 or lower.

2. If the system is still not working properly after restarting the system, please check the system for viruses. Some viruses will cause such problems after infecting the system.

3. In addition, please try to re-plug the memory card and the card device. Sometimes the hardware will be loose due to various hardware failures.

The above is the solution after the WinXP computer starts, there is no signal on the display. If you have any problems with this problem, you can try to fix these methods introduced by Xiaobian.