Two major phenomena and solutions for common computer crashes in Win7 system

The crash is the crash that occurs during the use of the win7 Ultimate system. The crash at runtime is usually caused by a conflict between the application and the operating system or some bugs in the application itself. The chance of death at runtime brings us a lot of inconvenience. Today we introduce you to two common crashes and solutions. The crash occurred during the power-on self-test. Because it was a crash at the time of the power-on self-test, the motherboard crashed when the power-on self-test was performed, and the fault remained. Then it is very likely that the memory, motherboard and other hardware are faulty. At this time, it is necessary to remove the board, the memory module, and the CPU, and first eliminate the possibility of contact problems. If it doesn't work, use the “replacement method” to exclude one by one until you find the problem. System timing freezes The system does not work for a period of time, there is a regular crash. This situation has a lot to do with power management, and of course other possibilities such as viruses are not ruled out. The advanced power management of the operating system will run the “screen saver” after the operating system has been idle for a period of time. Now, there are more and more “screensavers”, and there are many “screensavers” that are not doing very well. Of course, more is that the motherboard is not very good for "advanced power management", "close the monitor", "close the hard drive" after the hard drive. Solution: Check and kill the virus, depending on the specific circumstances, disable the "close monitor", "close the hard drive" and other functions, find some related patches.