How to install the system for the netbook-U disk boot installation system

1, U disk or memory card above 1G

2, UltraISO-U disk system file writing tool

Download address: http://www.xpxitongxiazai.com/soft/html/2681.html

3, system installation file

Thunder high-speed download address: (open Thunder, create a new download Task, and copy the following address into the "URL (URL)" column, click OK)

thunder://QUFodHRwOi8vNjAuMTcxLjIwNi4yMzQ6NDA0MC94aXRvbmcvtefE1Lmry75HSE9TVFhQyc/N+LG+v+zL2dewu/qw5lYxLjAuaXNvWlo=

HTTP download address: http://www.xpxitongxiazai.com/soft/html/2680.html

4, Hash V1.4-MD5 verification tool

Download address: http://Www.xpxitongxiazai.com/soft/html/74.html

After downloading the system, verify MD5 with Hash (open hash.exe and drag the system installation file into the window)

Start to talk about how to use the U disk to make the boot disk installation system

First step, double-click UltraISO.exe, then open just below System File

Step 2, insert the USB flash drive or memory card, select "Start Disc - Write Hard Disk Image"

The third step is to select the write mode and make the boot disk ( Back up important data before writing). There are two modes: USB-ZIP and USB-HDD. There are different modes supported by the motherboard. In most cases, USB-ZIP is supported.

Select "Yes" to continue writing data

The fourth step, after the production is complete, you can start to install the system. Insert the USB flash drive into the netbook and turn it on. Press DEL (or F2) to enter the motherboard CMOS settings during startup. Set the first boot device to USB or removable device. It can be started successfully.

Step 5, use U Start the disk, enter WINPE, the new book must be partitioned first, then double-click the "automatic installation system" in the lower left corner of the desktop

Step 6, press any key to start copying the system, the system will automatically restart after copying.

Note: U disk must be dialed when the system restarts.

After rebooting, the system will automatically deploy and install, including common software and hardware drivers.