As prices continue to fall, recorders have been purchased by more and more users. However, in the process of using, people often encounter some problems. Below, we will analyze the causes and solutions for these common faults, and hope to help everyone.
Common fault one: successful use of analog burning, the actual burning failed
The difference between the "computing burning" provided by the recorder and the "burning" command is whether to shoot the laser beam, and other operations are The exact same, that is, "simulated burn" can test whether the source disc is normal, whether the hard disk speed is fast enough, whether the remaining disk space is enough, etc., but it is impossible to test whether the disc to be burned has problems and Whether the power of the laser head of the recorder matches the disc and so on. In view of this, the description "simulated burning" is successful, but the real burning fails, indicating that the compatibility between the recorder and the blank disc is not very good, you can use the following two methods to re-test:
1. Reduce the writing speed of the recorder, it is recommended to 2X or less;
2. Please replace the blank disc of another brand for the burning operation. Another reason for this phenomenon is caused by the power attenuation of the laser head. If the same brand of disc recording is used, it is normal in the previous period, it is likely to be related to the head power attenuation, you can send relevant Manufacturer maintenance.
Common fault two: can not copy the game CD
Some large commercial software or game software, in the production process, the disc of the disc is protected, so in the process of copying the disc, there will be no copy Causes an error in the burning process or a situation in which it cannot be used normally after copying.
Common fault three: Burned CD music can't play normally
Not all audio equipment can read CD-R discs normally, most CD players can't read CD-RW discs normally. Content, so it's best not to use a recorder to burn CD music. In addition, it should also be noted that the recorded CD music must conform to the CD-DA file format.
Common fault four: During the burning process of the disc, the burning failure often occurs.
The burning success rate needs to keep the system environment simple, that is, the background resident program is closed. It is best to prepare a dedicated hard disk for the burning system. Software related to burning. In the burning process, it is best to save the data in the hard disk first, make it into an "ISO image file", and then engrave the disc. In order to ensure the smooth flow of data during the burning process, it is necessary to regularly defragment the hard disk to avoid the interruption of the recording due to the failure of the file to be transmitted normally. You can execute the “Disk Scanner” and “Disk Defragmenter” by performing “Disk Scanner”. To organize the hard disk. In addition, do not run other programs during the burning process, even the mouse and keyboard should not be easily touched. It is best not to connect to other computers for burning. In the process of burning, if the system administrator sends information to the machine, it will affect the recording effect. In addition, in the LAN, do not use resource sharing, if in the process of burning, other The user reads the local hard disk, which will cause the recording work to be interrupted or failed. In addition, pay attention to the heat dissipation problem of the recorder. Good heat dissipation conditions will give the recorder a stable working environment. If the burner is too hot due to continuous burning, you can turn off the computer first, and then continue after the temperature is lowered. Burn. For built-in burners, it is best to add an extra cooling fan to the chassis. The external recorder should pay attention to dust and moisture, so as not to cause the laser head to read and write abnormally.