The whole process of Windowsxp installation system Steps explained

What are the steps to install the system? I believe that it is still a fog for the rookie users. You are just not familiar with the whole installation process and the steps. Today, this tutorial provides you with the whole process and steps of installing the xp system. Detailed, unclear can take a good look.

The first step is to set up the light:

The so-called light start means that the computer first reads the optical drive when it starts up, so if there is a CD with optical function in the optical drive, you can catch it. Read it before the hard disk is booted (such as when installing the system from the CD).

Setting method:

1. Start the computer and hold down the DEL key until the BIOS setup window (usually a blue background, yellow English) appears.

2. Select and enter the second item, “BIOSSETUP" (BIOS settings). Find the item or group containing the BOOT text, and find the "FIRST" and "SECEND"; "THIRD"; respectively, which represent the "first start" & rdquo; & ldquo; second start & rdquo; and “ The third start & rdquo;. Here we set them in order, "CD drive" & rdquo; "floppy drive" & rdquo; & ldquo; hard drive & rdquo; (If you don't see these three E-texts on this page, usually the option menu on the right side of BOOT is “SETUP”; press Enter to see it.)

3. Choose three After the startup mode, press the F10 key, the E text dialog box appears, press the “Y” key, and press Enter, the computer automatically restarts, proving that the changed settings take effect.

The second step is to install the XP system from the CD.

Put the XP installation CD before rebooting. When you see the CD-ROM..... on the screen, press Enter. key. (Note: There are a total of five CD-ROMs behind the ".", you must hit the Enter key before the fifth point to achieve the light, otherwise the computer starts to read the hard disk, that is, skip the light to start from the hard disk .)

After XP system disk light is the blue background installation interface, the system will automatically analyze the computer information, no operation is required, until the display screen turns black, then the blue background appears. Chinese interface.

At this time, the XP system protocol appears first. Press F8 (representing the agreement), then you can see the information list of all the partitions of the hard disk, and there are Chinese operating instructions. Select the C drive, press D to delete the partition (before remember to back up the useful files of the C drive), the position of the C drive becomes “unpartitioned”, and then in the original C drive position (ie “unpartitioned”). Location) Press C to create a partition. The partition size does not need to be adjusted. After that, the original C drive position becomes “New Unused” and press Enter to continue.

Next, there may be a format partition option page. It is recommended to select <; format the partition with FAT32 (fast) & rdquo;. Press the Enter key to continue.

The system starts to format the C drive, which is very fast. After formatting, it is to analyze the hard disk and the previous WINDOWS operating system, the speed is also very fast, followed by copying files, which takes about 8 to 13 minutes (depending on the configuration of the machine).

After the file is copied (100%), the system will automatically restart. When you see the CD-ROM again....., you don't need to press any button to let the system boot from the hard disk. Because part of the installation file has been copied to the hard disk (Note: the CD can not be removed at this time).

The color XP installation interface with blue background appears. The left side has the installation progress bar and the remaining time display. The starting value is 39 minutes, which is also determined according to the configuration of the machine. Usually the installation time of the P4, 2.4 machine. It's about 15 to 20 minutes.

At this point, until the end of the installation, the computer does not need to do anything other than enter the serial number and computer information (fill in at random) and knock 2 or 3 times before the computer automatically restarts. The system will complete the installation automatically.

Although there are no pictures, such steps should be clear at a glance. If you want to install the system, you may wish to take a look at these steps. Try to do it. It is not difficult to install the system yourself. .