How to fix blue screen code 0X000000A5 when reinstalling XP system?

Some users find a blue screen after they have installed the XP system and found a login system. For all kinds of blue screens, users feel extremely headaches, but they have nothing to do. Today, Xiaobian brings blue screen code 0X000000A5 to everyone. This type of code hint also has methods such as 0X00000002, 0X81A53008, 0XE13291A0, 0X81A4C770.

blue screen code is how is it?

The blue screen code is usually caused by the motherboard BIOS not fully supporting the ACPI specification, or because the graphics card is loose, the golden finger is oxidized.

Blue Screen Code Solution:

1. If there is no corresponding BIOS upgrade, then when installing Windows 2K/XP, when there is "press F6 if you need to install a third-party SCSI or RAID driver” When prompted, press F7, so Windows will automatically disable the installation of ACPI HAL, and install Standard PC HAL.

2. If the blue screen code 0X000000a5 appears when installing the system, because The key recovery program requires ACPI support, so you can replace the system installation or install the driver with a new version of the system.

3. If the graphics card is loose or the golden finger is oxidized, try again after plugging it again. If it is not possible, you will have to replace the graphics card.

Other solutions:

1. Comprehensive detection of virus Trojans and malicious plugins.

2, after the power is off, open the chassis to clean up the dust, check all connections, especially the memory, unplug the memory, clean the pins and re-insert them; if it is a separate graphics card, the same way.

3, run chkdsk /r at the command prompt to repair the partition where the system is located; the command is executed when restarting, blue screen white, do not interrupt.

4, set the virtual memory to a partition with a large remaining space.

5, set the BIOS to the factory defaults; in the BIOS set the "ACPI Suspend Type" in the power management settings to S1 (some machines display STR) or directly close the ACPI option.

6, with the driver wizard 2011, update the motherboard, graphics card, sound card, network card driver.

The above is the solution to the blue screen problem, I believe it will help everyone, but how to quickly fix the blue screen problem, the most important thing is to prescribe the right medicine, therefore, users first need to find out the reason for the blue screen of the computer.