The specific steps of the hard disk installation windows xp system

I believe that for most users, it is difficult to install the system by yourself. There are many ways to install the system. Use U disk to install or use CD-ROM to install, etc. Windows xp system is the most common way, so how is the specific steps done? Let the master tell you.

The specific steps of installing Windows XP system on the hard disk:

First, prepare for work

1. Prepare the system disk and drive disk. If it is not the original disk, you must first look at the model and driver of the graphics card, sound card, network card, optical drive and other devices in the original computer device manager, and then download it on the Internet and put it on a disk other than the C disk.

2. Save your useful data in the C drive of the system to another partition.

Second, set the CD-ROM boot, the following are two different BIOS settings:

1.Award BIOS 4.51PG settings restart, press DEL to enter the Award Bion 4.51PG interface, use the function keys Zone direction key select the second line "BIOS FEATURES SETUP", press Enter to enter the BIOS FEATURES SETUP interface, find "BOOT SEQUENCE", use pgup or pgdn to change the A, C displayed on the right side to CD-ROM, C, A, press ESC, press F10, press Y, press Enter, save to exit.

2.Award BIOS 6.0 Settings Restart, press Del to enter BIOS, find Advanced Bios Features and press Enter to enter Advanced Bios Features interface. Find First Boot Device, use PgUp or PgDn to turn HDD-O into CDROM, press ESC, press F10, press Y, press Enter, save and exit.

Third, pre-installation

1. Insert the XP installation CD into the CD-ROM drive and restart the computer. When you see “CD…press any key...” at the bottom of the screen, timely Press any key, otherwise the computer will skip the light and start it from the hard disk. After the XP system disk is started, it starts to install the program, copy files, and load the hardware driver into the Chinese interface of the installation wizard.

2, welcome to install the program after scanning, choose to install - enter;

3, check the startup environment - enter;

4, agreement, agree, press F8;

5, specify the installation to that partition, C--carriage;

6, specify the use of the file system, format the disk partition with NTFS - enter;

7, enter the installation program format, create a copy list, copy the file to the WIN installation folder;

8, start initializing XP related files and configuration, save initialization parameters, restart. After rebooting, when you see the words “CD…press any key...” at the bottom of the screen, don’t press any keyboard this time, let it skip automatically.

Fourth, after the installation restarts, enter the installation interface, you just follow the instructions of the computer step by step. The general steps are as follows:

1, regional and language options — next step;

2, name, company name & mdash; next step;

3, product key —Next;

4, computer name, administrator password, next step;

5, date and time settings — next step;

6, install protein Network, select typical & ndash; next step;

7, workgroup and computer domain & mdash; lower punctuality;

8, copy files, install start dishes, register components, save settings, delete Temporary files installed, reboot. After rebooting, you can still see “CD…press any key...” at the bottom of the screen, don't press any keyboard, let it skip automatically.

Five, complete the installation

1, automatically adjust the resolution;

2, enable automatic update & mdash; next step;

3, who uses this Computer — restart.

Sixth, set up the computer

1. After rebooting, enter the XP desktop. At this time, the desktop only has the recycle icon and taskbar. Right click on the desktop and select “ldquo; ”--&&quo;;Desktop --&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&=

2, whether it is normal to test run, such as silent or abnormal display, right click "My computer", select "properties" & rdquo;--“ hardware--“ device manager ”— The option with a yellow question mark or an exclamation mark in front of it indicates hardware that is not recognized and has no driver installed. Right-click and select “Reinstall Driver” to insert the corresponding drive CD and select “Automatic Installation”. The system will automatically recognize the corresponding driver and the installation is complete. Use the above method until the previous "question mark" disappears. The drivers that need to be installed generally have drivers for graphics cards, sound cards, network cards, and cats. At this point, the installation is complete.

Although Microsoft has announced that Windows XP is about to launch the system market, there are still many users who use the xp system. The six steps mentioned above are the way to install the Windows XP system from the hard disk. I hope to favor the xp system. Users can help.