Use Windows with ICS function to achieve online sharing

Broadband Internet access is nothing new. As we all know, broadband networks generally use a monthly billing method, which is too wasteful for some friends who are not regularly online. Many friends have come up with a way to share broadband networks with their neighbors or nearby friends in order to “small and smothered food”. Everyone has a little money, share a broadband line, and make full use of network resources. But these are more troublesome. Today, Xiaobian teaches you how to use Windows to bring ICS function to share Internet access. The specific operation is as follows.

Installing Internet Sharing

Windows 2000 Internet Sharing Function It has been installed into the system by default and does not need to be installed.

Setting up Internet sharing

You need to enable the Internet sharing function of Windows 2000 and make certain settings at the same time. The specific steps are as follows:

Network and dial-up connection

(1) On the computer [Desktop], right-click [Network Neighborhood] and click the [Properties] menu in the pop-up menu to enter [Network and dial-up connection] window, as shown in Figure 1, generally shows local connection 1, local connection 2, for the convenience of viewing, the author changed the access LAN connection to the ground, and changed the connection to the broadband network to broadband;

Enabling Shared Connections

(2) Right-click [Broadband], select the [Properties] menu in the pop-up menu, pop up the Properties dialog box for the Broadband Connection, and click the [Share] tab. Check the [Enable Internet Connection Sharing for this connection], click the [OK] button;

Internet Connection Sharing Tips

(3) A pop-up window prompts [Internet Connection Sharing When enabled, your LAN adapter will be set to use the IP address 192.168.0.1. Your computer may lose its connection to other computers on the network. If these computers have static IP addresses, you should set them to get the IP address automatically. Do you really want to enable Internet connection sharing?], the prompt information has been said very clearly, it will change the [local] connection IP address to 192.168.0.1, click the [Yes] button to confirm;

:] If the local connection IP address does not belong to this network segment, other computers on the network will not be able to access the machine after the change. The solution is to change the IP address of other computers to the 192.168.0 network segment, and the IP address is from 192.168. 0.2-192.168.0.254 is OK, the subnet mask is 255.255.255.0, but the IP address of each computer should not be repeated. Previous12Next page Total 2 pages