How to shield five network functions - improve XP system speed

                How to make Windows XP system achieve fast start has been the unremitting pursuit of computer enthusiasts. However, when we exhausted the tricks of various optimization systems, the progress bar in the system startup screen still needs to be rotated over a dozen times to start the system successfully. What is going on? Is it the various kinds summarized in the media? System optimization tricks are used to "fudge" In fact, many of the network setup functions hidden in the dark of the system are inaccessible to many system optimization tricks. In many cases, these improperly configured network functions slow down the system startup speed; for this reason, we only need to improperly If the network function is blocked, you will be able to speed up the system and add a whip!

1. Shield automatic allocation function

The “automatic allocation function” mentioned here refers to the local system NIC in the default state of Windows system. The function of automatically assigning an IP address to the device; once the IP address of the local network card is set to be automatically acquired, each time the computer system starts, it will take a certain time to apply for a dynamic IP address that can be used by the DHCP server in the LAN network, if When the DHCP server is not accessible, the computer system will try to connect and access the DHCP server repeatedly until the access timeout, so that the system startup speed will be seriously affected, and even the system suspended animation. In order to avoid the system taking time to connect and access the DHCP server during the startup process, we only need to set a static IP address for the NIC device in advance. To assign a static IP address to the NIC device, follow the steps below: Br>

First click the “Start”/“Settings /“Network Connections”/“Local Connections” command to go directly to the local system "local connection" property settings Interface, in the "General" tab of the settings interface, select the "Internet Protocol (TCP/IP)" option, and click the "Properties" button in the corresponding page to open the property settings interface, will In the setting interface, use the following IP address & rdquo; option to select, and specify an IP address for the NIC device with the same subnet as the ADSL device address; for example, the IP address of the ADSL device is generally 192.168. 1.1”, then we can set the NIC IP address to “192.168.1.11”, and set the subnet mask address to & Ldquo;255.255.255.0”, the gateway address is set to “192.168.1.1”.

Next, "Use the following DNS server address" to select, and then fill in the real DNS server IP address of the local ISP here, for example, the real DNS address of the ISP is "61.172." 7.1 & rdquo;, then we can fill in the address here, and click "definitely" to save the above IP address parameters, I believe that the computer system will not need to be activated in the future. Take the time to access the DHCP server, then the system startup speed will definitely take it to the next level.

Previous page123Next page Total 3 pages