Quickly set up wireless network under Windows XP

1. On the Windows XP system desktop, click the "Start" /"Settings" /"Control Panel" command to open the Control Panel window, double-click the network icon to open the "Network Connection" interface;

2. In this interface, right-click the “Wireless Network Connection” icon, and from the shortcut menu that opens, execute the “Properties” command, and the system will automatically display the “Wireless Network Connection Properties” setting dialog. Box;

3, here, you can use the mouse to select the "Wireless Network Configuration" tab, and in the tab page that pops up later, use the mouse to select the "Configure my wireless network configuration with Windows" option This will enable the automatic wireless network configuration function;

4, then click the "Advanced" button here, open an "Advanced" settings dialog box, and select "Computer only" in this dialog box. To the computer (specific) option, to achieve the interconnection between the computer and the computer;

5, if you want to be able to connect directly to the computer, but also want to keep the connection If you enter the point, you can use the mouse to select the "Any available network (preferred access point)" option;

6. When the preferred access point is wireless, if the network is found to be available, the system will generally try first. Connect to the access point wireless network; if the access point network in the current system is not available, then the system will automatically try to connect to the peer-to-peer wireless network;

7, for example, if it is working at the access point wireless When using a laptop in the network and then moving the laptop to another computer to use in the computer network, the automatic wireless network configuration function will automatically change the wireless network parameter settings as needed. You can do without any modification. In this case, you can connect directly to the home network;

8. After completing the above settings, click the “Close” button to exit the setting interface, and click the “OK” button to complete the wireless LAN. Connection settings work, if the parameter settings are correct, the system will automatically prompt the wireless network connection has been successful