Linux configuration minicom step

As a serial communication tool minicom, the user is really a lot, and many people do not know how to configure minicom, the following small series will introduce you how to configure minicom Linux, interested Let's get to know your friends.

Description: minicom function is to connect the boards to the host, the host used to manipulate development board.

First, connect the development board to the host

Second, install minicom apt-get install minicom in Linux

Third, configure minicom

Enter the command sudo minicom -s to enter the configuration interface

2. Select the serial port setup in the configuration interface and press Enter to enter.

3, then press A, then /dev/tty0 to /dev/ttyUSB0, press Enter to confirm.

4, press F again, change yes to NO, press Enter to return to the configuration interface.

5, then select save setup as dfl to save, you can also choose save setup as. . Custom save.

6. Finally, Exit is selected and you can use minicom after a while.

Note: After entering minicom, you can view the development board files.

Fourth, return from minicom to the host terminal First press ctrl+c, then press q, then select yes, you can exit mincom.

The above is the introduction of Linux configuration minicom method, after installing minicom, it will not be configured. After the introduction of this article, how do you learn how to configure minicom?