WindowsXP shutdown failure full contact, Window XP operating system tutorial

For Windows XP, because it uses the NT core with high security performance, the system runs fairly stable. In addition to the slow shutdown speed, shutdown faults rarely occur under normal circumstances. However, you should also pay attention to some of the following symptoms. Let it shut down but restart This fault is the most common fault in the Windows XP operating system shutdown failure. The cause of the failure may be due to the following reasons: 1. System settings are in the confusion Windows XP defaults, when the system is wrong, it will automatically restart, so when the user shuts down, if the system is wrong during the shutdown process, it will be restarted. Start your computer. Turning this feature off often resolves the failure of an automatic restart. Right click on the desktop “My Computer", select “Properties> in the pop-up context menu, pop-up "System Properties" window, click on the "Advanced" tab, click “Start and In the "Recovery" column, the "Settings" button pops up "Startup and Recovery" window, as shown in Figure 1. In the “System Failure” column, remove the checkmark before the “Automatically restart” option, and click the “OK” button. 2. Advanced power management in the ghosts As we all know, shutdown is closely related to power management, the cause of the shutdown failure is likely to be caused by poor power management. Click “ Start & Rarr; Settings & Rarr; Control Panel & Rarr; Performance & Maintenance & Rarr; Power Options & rdquo;, in the pop-up window, enable or disable "advanced power support" as needed. If you are using "Enable Advanced Power Support" when the failure occurs, try to cancel it. If the failure occurs, you are using the cancel "advanced power support" and try to enable it. Will be solved. 3. USB devices are not worrying Now when USB devices are popular, what U disk, mouse, keyboard, Modem, etc., have everything. As everyone knows, these USB devices are often the main culprit for shutdown failures. When a shutdown turns into a reboot failure, if you have a USB device attached to your computer, please unplug it and try again. If you are sure that the USB device is faulty, it is best to replace the device or connect it. An external USB Hub connects the USB device to the USB Hub instead of directly to the USB port on the motherboard. Shut down to give you a big blue face 1. Windows XP has a bug Windows XP has a shutdown bug, if your computer often turns off the blue screen during the shutdown process, and the fault is intermittent, press & ldquo; Ctrl + Alt The +Delete” button is also unresponsive, so be sure your system has not been patched. Please download the SP1 patch package and patch it. Generally it will be fine. 2. There is a problem with the driver of the innovative sound card. If you are using an innovative sound card and a blue screen appears during the shutdown process, the error code is “0X0A”, then enter the device manager, delete the sound card, refresh it, and manually install the latest one. Driver with digital signature. 3. Logitech mouse and keyboard are not perfect If you are using Logitech's network keyboard and installed Key Commander software to drive the corresponding network function of the keyboard, it may cause the shutdown to become a restart failure. If the driver for your Logitech mouse is MouseWare 8.6, it will cause a blue screen shutdown, you can only solve the problem by uninstalling the driver. Shutdown does not automatically cut off the power. During the shutdown process, everything is normal, but it stops at “You can safely turn off the computer”, but it cannot automatically cut off the power. You need to manually press the “Power” button on the main panel panel to shut down. . The reasons for this failure are generally as follows: 1. No power support is enabled Click “Start →Setting →Control Panel →Power Options →High Energy Power Management>Check in “Enable Advanced Power Management support & rdquo; 2. The BIOS settings are incorrect. It may be a mistake to modify the BIOS related power management options. If you are familiar with the BIOS settings, please enter the BIOS and try to modify the BIOS related options for power management. If you are not familiar with the BIOS, then simply select the "Load default setup" option to restore the BIOS to the factory default settings. 3. Office XP also gets into trouble Ctfmon.exe in Office XP has always been a controversial issue. Ctfmon.exe is Microsoft's text service file. As long as the user installs Office XP and installs the optional user input method component, this file will be called automatically for speech recognition, handwriting recognition, keyboard and other user input technologies. Text input support. Even if we didn't start Office XP, Ctfmon.exe still runs in the background. It is, it often causes a shutdown failure, you may wish to uninstall it. Click “Start →Settings →Control Panel →Add/Remove Programs", select "Microsoft Office XP Professionain With FrontPage" in the currently installed programs, click "“Change" button, in “ In the Maintenance Mode Options dialog box, select the “Add or Remove Features” option, click Next, and “Export Options for All Office Applications and Tools” dialog box, expand the “Office Sharing Function” option. , select the "Chinese optional user input method" option, select "Don't install" in the pop-up menu, as shown in Figure 2, click the "Update" button. 4. APM/NT Legacy Node is not turned on Under normal circumstances, APM/NT Legacy Node is not turned on, which may cause shutdown but cannot automatically cut off the power. Go to the device manager and click on “View → Show hidden devices> in the menu bar to display all hidden devices in the system. Check the APM/NT Legacy Node option in the device list box. If your computer supports this feature, you will have this option, double-click, in the pop-up properties dialog box, click the “Enable Device” button.