What to do if the busybox verification fails

busybox is a Linux command box that integrates many of the tools and commands that compress Linux. It can be said that it is a powerful Swiss army knife in Linux tools. However, it is understood that many friends who have just contacted the busybox are not sure how to use the busybox, or they do not know what to do if they encounter verification failure during use. In view of this, today's Superman software Xiaobian will come to you to explain in detail how to use the busybox, as well as the verification failure solution, I hope to help everyone.

How to use busybox?

First of all, to use the busybox Android version, the mobile phone must be root first. The specific method is not described here too much;

Then download and install the root explorer;

busybox After downloading, use the data cable to link the phone, copy the unzipped busybox to the root directory of the sd card (or other directory, you can remember);

Use root explorer;

Browse to /sdcard, find busybox, long press, select Copy in the menu;

Browse to /system/bin/directory;

Click the remount r/w button in the upper right corner of the screen (the new version of root explorer is mount R/W seems to be pressed, press it anyway, you can paste it);

Click Paste button below the screen;

After the copy is completed, long press the busybox under /system/bin/, select Permission, set the permissions as shown in the figure (check all the above lines, others have hooks It doesn't matter);

At this point, your busybox is set up.

After installation, nothing will be displayed in the system menu. If Titanium Backup is installed, you will no longer be prompted to install busybox.

What should I do if the busbox fails?

The failure of the busybox verification may be caused by the fact that your phone does not have root. If you encounter verification failure, you can root again.

Brush failure solution:

1. May be the reason for the memory card, unplug the memory card to boot.

2. When the brush is cleared, enter the recovery mode, then select wipe chace and wipe date. Finally install the Brush Pack (already installed can be skipped). Then reboot to restart the phone.