What is sygate (with method of use)

SYGATE is a set of software that is easier and better to use than Wingate. SyGate is a set of users who allow users to share the entire LAN over an Internet connection via an Internet connection. At the same time, good software for Internet access. Support ModemISDN.CableModem only need to be installed on the computer with Modem in the LAN, so that more than two computers in the home can access the Internet.

How to use SYGATE

SyGate allows you to bring machines from the entire LAN to the Internet with just one modem. The setup is extremely simple, supports Windows 95/98/NT 4.0, and also supports ISDN, ASDL and Cable Modem. SyGate features SyGate is simple to set up, but it's very powerful, because it uses low-level packet switching technology and has excellent performance. It supports almost all Internet applications and protocols: Web browsersEmail ReadersNews ReadersWS_FTP and CuteFTP in Passive FTP modeICQMS CHATRealAudio (TCP connection mode)NetShowIRCDNSTelnetStarCraftDiabloUltima OnlineGameSpyQuake IIpingtracerouteDHCP server of NT 4.0 serverMS NetMeeting (Partially supported) configuration TCP /IP network environment

Determine whether to use RJ45 or coaxial cable networking, note that the interface of the two types of network card is different, it is recommended to use RJ45 mode, But buy one more HUB. If you only need two machines to connect to the network, you can also spend a few dollars to customize a special RJ45 line, so you can save the HUB money. Each machine is equipped with an Internet card, which is connected by a network cable to make sure that your network is connected (the network neighbors can see each other). Start -> Settings -> Control Panel -> Network -> Add -> Protocol -> Microsoft -> TCP/IP, add TCP/IP protocol for each machine. SyGate server (ie dial-up machine) TCP/IP settings: IP address = 192.168.0.1, subnet mask = 255.255.255.0, gateway = none, DNS = none. SyGate client (ie other machines going out via LAN) TCP/IP settings: IP address = 192.168.0.x, subnet mask = 255.255.255.0, gateway = 192.168.0.1 (pointing to SyGate server), DNS = 192.168.0.1 /or the DNS address provided by your ISP. Note: The IP address of each machine must be different, the format is 192.168.0.x, and the address of the SyGate server must be 192.168.0.1. Under the SyGate client, start -> run -> command -> ping 192.168.0.1 to see if you can ping. Under the SyGate server, follow the previous step to ping other SyGate clients. If you are PING, congratulations, the TCP/IP network environment is even better! After installing and debugging sg121.exe, it is installed on the SyGate server, and other machines no longer need to do any settings. After installation, SyGate will launch and pop up the following dialog box. Now you don't need to make any settings, directly start your dial-up network, dial up to the Internet, make sure that SyGate is successful online, you can connect to the Internet. From the SyGate client, start -> run -> command -> ping 202.96.122.45 to see if you can ping. If successful, it means that SyGate is already working! From the SyGate client, start -> run -> command -> ping www.sohoo.com.cn to see if you can PING通, if the domain name resolution fails, try to provide the client's DNS as your ISP. DNS address. If successful, the DNS is working properly. You're done! By default, SyGate will run as a Service, which means that when Windows 95 is up, SyGate will automatically run in the background, and you can run SyGate Manager to change settings. SyGate's default settings, SyGate has worked very well, no need for any other settings, this is the most attractive SyGate, in contrast, WinGate or WinRoute is much more troublesome. If you have time, you can do some very simple setups to make SyGate work better! Enable dial-on-demand. When SyGate detects a connection request to the Internet and the dial-up is not established, SyGate will automatically dial the Internet. Auto Hang up after 180 idle seconds, indicating that if you let the dial-up network idle for more than 180 seconds, SyGate will automatically cut off the dial-up network connection, you can set an appropriate idle interval. Start SyGate service automantically, determines whether SyGate is running as a Service.

Others, try it yourself. Internet application software settings for general Internet applications, directly used, SyGate has been well covered. However, there are always one or two diehards who need special care... FTP sets FTP software (such as CuteFTP or WS_FTP) to work in passive mode. Mail & News If you use Mail & News on the SyGate server and the SyGate client doesn't work, you can try the IP address of the SMTP/POP3/News server. StarCraft & Diablo Special Support “StarCraft” and “Big Pineapple”! You can also play these two games through the LAN to Battle.net! The only restriction is that you can't choose the same game group (it's said on the homepage), but I haven't tried this feature, hehe. RealAudio is set to use a TCP connection. ICQ You can send/receive information to others on the SyGate client and call others. Because now you are surfing the Internet through SyGate, in order for others to call you to Chat, you need to send a message to someone else, or let them send a message to you, and then you can Chat. The ICQ on the SyGate client should use "Dynamically allocated port" to configure "Behind firewall", click "Firewall Settings" :click "Next >": Click "Close" to end the setting.