Set the DNS server address

1. Install DNS service start —>Set —〉Control Panel—〉Add/Remove Programs—〉Add/Remove Windows Components—〉“Network Service”—〉Select“Domain Name Service System (DNS) & rdquo; & mdash;> Press OK to install 2, create DNS positive phase parsing area start & mdash; > program & mdash; > management tools & mdash; > select DNS, open DNS console & mdash; > right click “ Search area ”—〉Select“New Area&>—〉Select“Standard Main Area" (or "Active Directory Integrated Area" or "Standard Auxiliary Area")-->Enter Domain Name&ldquo ; abc.com & rdquo; mdash &;> enter the area to be saved in the file name & ldquo; abc.com.dns & rdquo; & mdash;> press Done to complete the creation create host records: Right-click & ldquo; abc.com & rdquo; & mdash;> & ldquo; New host ” —> Enter “www” at the name, enter “192.168.0.3”,&mdash at “IP address" ;>Press “Add Host”Complete 3. Create DNS Reverse Parsing Area Start —>Program & mdash;>Manage Tools —〉Select DNS, open DNS Console —〉Right click “Reverse Search Area&rdquo ;—〉Select“New Area&>—〉Select“Standard Main Area&”—>Enter the “Network ID” and “mdash;> Enter the file name of the area to be saved“0.168 .192.in-addr.arpa.dns”—〉Press Finish to complete the creation of the create pointer PTR: Right click “192.168.1.x.subnet”—〉Select“New pointer”—〉In &ldquo ; enter the IP address of the host IP number & rdquo; enter ftp & mdash in the "host name"; press "delete" to complete the addition of 4, enable the DNS cyclic reuse function such as www.abc.com corresponds to multiple IP addresses The order of DNS resolution is different each time. Right click and select “DNS Server”—〉Properties—〉Advanced—〉Select“Enable Loop"(round robin)-->Select“Enable netmask sorting&rdquo ;&mdas h;〉Press “OK”Return Note: If all IP and domain name servers are on the same subnet, you need to cancel “Enable netmask sorting” to implement circular multiplexing. That is, when the loop is enabled, when the IP and dns of the host are in the same subnet, they will always be at the top. When they are all in one subnet, they will not loop. Only when the netmask sorting is enabled, the loop can be implemented. use. The DNS server will return the same record with its own network ID to the client 5, create a standard auxiliary area, and implement DNS area replication on another DNS server. Right-click "Forward search area" & mdash; “New Area&>—>Select"Standard Auxiliary Area&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& : Right-click on the domain name server and click on the domain —>Select “Transfer from the primary server" and set the domain name server to allow transmission: Right click on the primary domain name server “abc.com” Domain —>Select “Properties”—〉Select“Regional Copy&>—>Check in the "Allow Copy" checkbox and select the host to allow replication (to all servers, only in “ Servers listed in the Name Servers tab, only allowed to the following servers) Complete server type conversion: Right click on the area — <;Properties”—〉Select“Type”“Change"button—〉Select the type of area to be changed—>Press “OK" 6. Implement DNS-only cache server to create a no DNS server in any region —>Right-click DNS server—>Select“Properties”—>Select “Transfer “"Enable Forwarder&>—〉Enter Forwarder IP Address &mdash ;> Press “OK“Complete the cache content in the "Cache only": Right click on "DNS Server" and select "Clear Cache" or select "DNS Server" & mdash; > in the menu select & ldquo; View & rdquo ;, senior & mdash;> right click & ldquo; cache find & rdquo; & mdash;> select & ldquo; Clear cache & rdquo; (client flush the DNS cache & mdash;) ipconfig /flushdns) 7, DNS Delegation (sub-domain turn) Create “subdomain.abc.com” host &mdash on the original domain name server; right click on the abc.com domain and select “New Delegation&r Dquo;—>Proxy the domain of subdomain.abc.com to the host &mdash of subdomain.abc.com;>Create a “forward standard area&subquo;subdomain.abc.com—>Add related on subdomain.abc.com Host record 8, set the dynamic update of the DNS zone, right click and select DNS on the area — > select “ attribute & rdquo; & mdash; > select “ regular & rdquo; in the "allow dynamic update", select yes & mdash; 〉 then Press “OK”—〉In the local DHCP server—>Right-click to select DHCP Server—>Select“Properties”—〉Select“DNS”—〉Select“ is not supported enable dynamic update of DNS client update & rdquo; & mdash;> use the ipconfig /registerdns on the client to update the domain name registration information the client needs to pay attention to the full computer name into myhost.abc.com 9, configure the DNS client on the client Open the tcp/ip properties dialog box on the computer and enter the ip address of the dns server in the address bar of the dns server. You can manually configure up to 12 DNS servers. Maybe the questioner is wondering how to set it up? If you only want to do LAN, you do not need to connect to the external network, you do not need to set it. If you connect to the external network, there will be a router, DNS can be set in the router, or directly on the machine, the specific value

Ask the local telecom operator, winxp, network neighborhood - right-click properties - (in the window ) TCP /IP protocol - attributes - directly fill in, win98 network neighborhood - right-click properties - (in the window) TCP /IP -> Network card name - attribute - DNS configuration - enable DNS - fill in the host name (any character) - enter DNS - add - OK - make sure you don't need to set all your choices to get automatically ok if your adsl and others share and you want to control someone else's computer or you want to have a fixed and personalized bureau Domain IP should be set up. For example, your server address is 192.168.1.1 and you want to set the ip with 8 in the ip address: 192.168.1.8 Subnet mask: 255.255.255.0 (this step you just set IP, click TAB will automatically set the default gateway: 192.168.1.1 then DNS: this is actually There is no need to set.