The ip address is displayed as a reserved address. Solution

Is the ip reserved address? Ip as a computer network interconnection communication protocol, when dhcp exceeds the system specified time, it will automatically assign a reserved address as ip, if the host ip address is reserved address, then you can not access the network, then when the host ip becomes What should I do when I reserve an address so that dhcp can regain a normal IP address? The following small series will explain to you the reason and the solution of the ip address to display the reserved address. The ip address is displayed as the effect of the reserved address: the network cannot be accessed normally. Cause: 1dhcp service is faulty, can not automatically obtain the normal access network ip; 2 network cable problems, causing dhcp server to automatically obtain ip failure; 3dhcp service does not start normally; 4 router failure or lsp damage; 5 NIC file corruption; Method: 1. First press the combination key win+r to open the running window, input cmd and press Enter, call up the command prompt window, input ipconfig and press Enter to check whether the ip address is normal, as shown in the figure: 2 If the obtained ip is 169.254.xx, the client cannot get the response from the dhcp server. In this case, first determine if there is a problem with the network cable, then open a command prompt window, then type ipconfig /release and press Enter, then enter ipconfig. /renew and press Enter to see if the problem is solved, as shown in the figure: Note: The ipconfig /release command means to release the original ip; the ipconfig /renew command means to reacquire the new ip 3. If the problem is still not solved , open the service and find Check “Remote Procedure Call (RPC) Locator” and “DHCP Client” to stop running. If the display has stopped, start it and re-execute the ipconfig /renew command in the command prompt window. Show: 4. If the service in step 3 has been started automatically, it means the router is faulty or the local computer lsp is damaged, restart the router, and then use the 360 ​​security guard or lsp repair tool to repair the local computer lsp file, as shown in the figure: 5. If the above solution The method is not effective, then the most direct method is to manually set the static IP address, if the static ip can not be used, the network card is broken, re-install the network card driver and then install the network card driver that matches the computer, as shown: Summary: The above is the solution when ip is reserved address, users can follow the above steps one by one, I hope this tutorial is helpful to everyone.