How to do the 1502 error in the WiFi sharing wizard? Error code solution

Through the wireless network card, the WiFi sharing wizard allows users to use WiFi for free. It is a very easy to use wireless sharing software. However, the software that is easy to use will also have problems. This is not the case. Some users have encountered the problem of setting the IP address of the network card, which causes the WiFi sharing wizard to fail to start. Let's take a look at the solution together.

What should I do if the WiFi sharing wizard has a 1502 error?

Due to the IP error of the virtual network card assigned by the system, it can be solved by the following method:

1. Open the network and sharing center

2. Click Change Network Adapter Settings

3. Open CMD Commander as Administrator

4. Run netsh wlan set host mode=allow and press Enter

5 Change the adapter settings to find "Microsoft Virtual WiFi Miniport Adapter" or "Virtual Network Adapter"

Right click on the properties, find IPV4 and double click, manually change the IP address and subnet mask

6, start the WiFi sharing wizard

The above is the WiFi sharing wizard to set the network card IP failure solution. If you have encountered such problems, then try the Xiaobian method.