Reasons and solutions for the connection of the millet box to the computer

After the millet box is connected to the computer, it is convenient to download the installation management application in the computer, because many users can not connect the computer to the Xiaomi box. The following system home Xiaobian introduced the reasons why the Xiaomi box can not be connected to the computer and the solution. The reason why the millet box can't be connected to the computer is that the millet box driver is not installed in the computer; second, the millet box is not plugged in (the computer USB interface voltage is low, can not directly supply power to the box). 3. The millet box ADB switch millet box cannot be connected to the computer. If the solution to the problem that the Xiaomi box can't be connected to the computer is already known, then it is easier to solve the problem. 1, the first is to solve the problem of the millet box drive, this is very simple, as long as the millet box and the computer successfully connected, and then download and install the pea pod, 91 assistant and other software in the computer, open the box can automatically detect the millet box, and install Drive; 2, for the millet box is not connected to the power, this is very simple, as long as the millet box is connected to the power supply, you can check some power links; 3, millet box is running Android system, we can see it as It is an Android mobile phone device. The Android mobile phone is connected to the computer. It is necessary to turn on the USB debugging mode. The same is true for the Xiaomi box. Many children's shoes can't connect to the computer when they encounter the Xiaomi box, which is caused by the USB debugging without opening the Xiaomi box. The USB debugging mode setting of the Xiaomi box is to set the ADB to be enabled. The specific method is as follows. 1) Connect the millet box to the TV, then use the remote control to operate, go to [System Settings] - [Accounts & Security], and then set ADB to "Allow", as shown below. 2) In the next prompt, select “OK” 3) After the above operation is completed, the Xiaomi box can be successfully connected to the computer, as shown in the figure below. The reason why the Xiaomi box can't connect to the computer and the solution are introduced here, I hope to help everyone. This article comes from [System Home] www.xp85.com