Epson cleared cracking software to use

First, the main program window

icon in the system tray, right-click menu that appears, click "show main window" appears the main program menu. The wizard's main program window has two options: ink monitor and configuration.

1. Ink monitoring window
Includes three functions: ink monitor histogram Monitor Type Monitoring type Refresh Refresh histogram: In normal mode, the current ink remaining capacity is displayed.

Monitoring Type:
Printer Report: In normal mode, the remaining ink capacity of each color is displayed. This function can display the remaining ink capacity of all EPSON printers installed in the system.
Head ink shots: Shows the ink consumption for each color after turning on the printer to complete a print job. This program can be displayed even after the print job is completed, even if the program is not running when the printer is turned on.
Refresh: Refresh the monitoring type data.

2. Setup window (below) Installed Printer: Select the system installed printer
Print model: Select the type corresponding to the printer installed on the system (the printer in this option is the printer supported by this wizard).
Do not load Epson status agent service at startup: When the computer restarts, the EPSON ink monitor program is removed from the memory. This function is very useful when the sprite reports an error.
Start utility at Windows startup: Select this option to start the sprite in a minimal way the next time the computer is restarted. This feature is very important when using the ink freeze function.

Note: The sprite will remember all your settings, so you don't need to reset it the next time you start it. Close the main window and the sprite will exist in the system tray in a minimal way.

Secondary, Reset Counters Functions
This function is dedicated to refreshing the cartridge chip.

EPSON printer in order to prevent the ink container is filled, ink is provided chip count. The sprite can directly manipulate the chip, and the sprite can support most of the machines. A small number of machine chip refreshes require ink freeze function and some special methods. I will introduce it later.

Reset all counters: It can refresh all colors and works very well on many types of printers. Empty cartridges are also available.
Reset all color counters: Refresh all colors.
Reset black: Refresh black
Reset cyan: Refresh blue
Reset magenta: Refresh red
Reset yellow: Refresh yellow
Reset light magente: Refresh light red
Reset light cyan: refresh light blue
Reset gray: gray refresh

Note: some features on a number of printer menus can not be used is normal.
2. After finishing any color, you must turn off the printer for 20 seconds and then turn it on. For some models, turn off the printer by unplugging the power. //This article from the application of computer hardware and software network www.45it.com reproduced please specify

three cartridge exchange function (also known as heat exchange)

What is hot swap?
When the ink cart is in the parking space, the machine will read the data of the chip, put the ink cartridge into the printer, the ink data will be read by the printer, if the printer can not detect the replacement cartridge, you can put an empty cartridge Put in the printer. When the ink cart returns to the parking space, the previously read data is written to the ink cartridge. This is the heat exchange. This is an experimental feature that allows you to replace the cartridge under abnormal conditions, so the printer does not see any signal to replace the cartridge.

Note: Sometimes the heat exchange method will damage the machine. Do not use this method for machines supported by the elves. It may be useful for some high-capacity ink cartridges, but there is no test. Do not take the wrong ink cartridges during hot swapping. In the event of a collision in the heat exchange process or if you hear some strange sounds or see the nozzle move to the far left, please leave it alone. Click "Move head back to parking position":

Move head to exchange position: Move the ink cart to the exchange point;
Move head back to parking position: Move the ink cart back to the parking spot (absolutely not Move by hand;
Move head back safely: Allows you to manually move the ink cart from any place back to the parking spot (this is very safe, but sometimes the printer can recognize the replaced ink cartridge).

Fourth, the head cleaning function

Fen head cleaning will consume a lot of ink, this function can achieve normal cleaning, sub-color wash, powerful cleaning.
Black head cleaning: only clean the black ink head;
Universal black: clean the black ink head of the unsupported machine;
Color head cleaning: only clean the color ink head;
Uuiversal color: cleaning is not Color ink head of the supported machine;
Alternative color: support the cleaning of the old model printer color nozzle;
Normal cleaning: normal cleaning;
Powerful cleaning: strong cleaning, will waste a lot of ink, often used for blocking Cleaning after the head;
Initial charge: only use the service, use about one third of the waste of ink, can also be used for nozzle cleaning;
Print nozzle check pattern: print ink head detection pattern, used to test whether plugging . It cannot be used for some older models and unsupported machines.