Potplayer hard solution settings processing

As a version of KMPlayer's "upgrade". PotPlayer adheres to KMPlayer's flexible configuration and rich filters. At the same time, according to the user's feedback, the original structure of the software has been greatly simplified. At the same time, Potplayer also completed DXVA hardware decoding and multi-thread decoding that KMP could not implement. Allows you to watch HD movies more smoothly.

First, the video hard solution part Open the PotPlayer, press F5, select the "Filter" page on the parameter options page, and then press the map to do, basically in order.

1. “Filter” page. "Internal Image Processing Filter Settings" for "Do not use".
2. Click on the "Filter" & "Video Decoding" page. In "Internal Decoder/DXVA Settings" Select "Hardware Acceleration (DXVA) Settings" under "Always use ". 3. Click the "Video" page. Select "EVR(Vista/.Net3)" in "Video Rendering Device". At this point, the hard solution setting is completed.

Second, audio hard solution

1. Hardware driver settings. Here is an example of the X-Fi hard solution setting:
2. Click the “Filter” & "Audio Decode" page. Click "Internal Decoder (S/PDIF, HDMI Output) Settings " to open the "Audio Decoder Settings" page. Check the options under "Straight (S/PDIF, HDMI)". At this point, the hard solution setting is completed.

3. Some netizens have suggested that the AC3Filter has a large dynamic popping problem, which can be handled by adding a plug-in decoder. First, add the decoder, here select InterVideo Audio Decoder
Then, open S/PDIF output (the InterVideo Audio Decoder option is selected) Finally, select the SPDIF output of the sound card. OK, the player loses volume control, and thus the hard solution is turned on.