The official solution for upgrading HP10 printers after upgrading win10 system

Recently, many users who connected HP printers on their computers reported that after upgrading the Win10 system, HP printers could not be used. Moreover, there are still many HP printer users who have encountered this failure. In response to this failure, Microsoft officially gave the solution. Below, let's take a look at how to handle the upgrade of the Win10 system. HP printers cannot use this problem!

HP printers cannot be used
This Class problems are usually caused by driver problems. Microsoft explained that this is because the software has not been successfully migrated after upgrading to Win10. The system will give a prompt for "HP ENVY e-All-in-One printer installation failure". You will need to remove the HP printer driver software from the system and reinstall it. In the MSDN related page, Microsoft gave detailed steps, as follows:
Delete HP printer driver and software:
1. If your printer has been connected to the computer via USB, disconnect the USB connection;
2. Open Control Panel — Programs and Features (Uninstall or Change Application);
3. Find the HP printer in the software list and uninstall it;
4. Restart the computer.
Reinstall the printer driver:
1. Open the HP printer;
2. Connect the printer to the computer;
3. Download the HP printer driver.
4. Install the driver after downloading (can also be installed directly using the driver installation assistant provided by HP);
Restart the computer and printer:
1.Press the power button on the printer to turn it off;
2 Turn off all programs running on the computer, restart the computer;
3. Turn on the printer;
4. Try to print the document to confirm that the printer is back to normal operation.
If you can't use the HP printer after upgrading the Win10 system, then most of the drivers are caused. Try installing the driver again.