Win10 broadband connection prompt error 676 solution

I believe everyone knows that you need to make a broadband connection before going online, but you may encounter various error prompts when you connect. For example, if a user recently has an error code 676 when reflecting a broadband connection, what is going on? What? In fact, this is a problem with the equipment room, causing the phone to be busy. How to solve this problem? In fact, users can log in to solve this problem by dialing continuously. The following small series for everyone to introduce the Win10 broadband connection error 676 solution.

Analysis:

1, the computer network card address conflict.

2. There is a user attack impersonation gateway under isp.

Solution:

1. The PPPOE dial-up protocol that comes with the system is being used. You need to disconnect the connected PPPOE link or restart the computer.

2, the client is not normally offline, this prompt will appear when dialing again. It is recommended to turn off the MODEM for 5 minutes before the system automatically releases the user account and then log in normally.

3, modify the physical address of the network card.

If the fault is still not solved by the above method, then the reason for the physical address of the network card should be considered. Generally, the address pool is full or the physical address of your network card is stolen, and most of them have error 676. The reason for the user is caused by the physical address of the network card, so this method is the most effective solution for most errors 676.

(1) Right click on the "My Computer" icon and select "Manage", select "“Device Manager" in the left column of the popup window, then in the right column Double-click "Network Adapter" to select the currently used NIC.

(2) Right-click to open the NIC's "Properties", select the "Advanced" tab, and select "Network Address".

(3) Click on the "value" on the right side, fill in the new NIC physical address (different from the original physical address) —— 12-digit hexadecimal number (as long as you set The new address does not happen to be the same as others.)

(4) The physical address can run the cmd command, execute ipconfig /all to view.

The above is the solution for Win10 broadband connection error 676 introduced by Xiaobian. If the user cannot solve the same problem, you can follow the above steps. After the operation is completed, you can connect to the network normally.