What should I do if the Win10 system NIC driver cannot be used? Network card does not support win10 how to solve?

With the continuous improvement of the Win10 system, more and more people are using the Win10 system. However, some users have recently reported that the Win10 NIC driver cannot be used, which makes it impossible to connect to the network. What should I do? Below, let's take a look at whether there is any solution.

When there is a problem with the NIC driver of Win10 system, the following symptoms are usually found:

1. The small computer in the lower right corner has red XX.

2. There is no network adapter in the device manager and there is no yellow exclamation point device.

3. The driver that is manually downloaded from the official cannot be installed (the installation prompts that this computer does not have a network device, etc.).

These symptoms can directly cause the computer to be unable to connect to the wired network. In this case, you can first use the computer's own repair function to repair.

Method Steps:

1. Right-click Computer ——Properties——Device Manager——Network Adapter. First uninstall the NIC driver whose original model is incorrect or does not display the model. After the uninstallation is completed, rescan and check the hardware changes.

2. Upon completion of the unrecognized device where there is a network adapter, computer repair their own to complete. Then install the driver life network card version (in the case that the computer has no network, you can use the mobile device to transfer the driver life of the network card version to the computer), the network card version of the driver life can be installed at the same time to install the network card driver detection. If the network card problem cannot be solved in this step, the network card driver can be re-detected in the driver life interface, and the network card driver is reinstalled to repair the network card driver.

3. repairs are completed, the drive of life will show the results of repair, this time, the network card driver will solve the problem.

4. When the wireless network card driver problem, repair may be performed in accordance with the process of the network card driver. First uninstall the current wireless network card driver in the network adapter, then reload, and then use the driver to repair.

These are the NIC driver under Win10 systems solutions can not be used, after the above operation settings, network card driver can normally use, but also can not solve the problem of access to the Internet.