Does the WIN7 system use the built-in driver to install the hp5200LX printer?

hp5200LX is installed in the WIN7 system with its own driver<1>1. First connect the USB cable (the line should not be too long, within 2 meters). In the device and printer, there will be a 5200LX icon with a yellow exclamation mark. As shown in Figure 1 below

2, on the 5200lx icon, right-click properties, the following interface pops up. As shown in Figure 2 below

3, select the hardware, find Generic IEEE1284.4 printing support selected, click on the properties, as shown below Figure 3

4, select the driver, choose to update the driver, as shown in Figure 4< Br>
5, pop up the following interface, choose to browse the computer to find the driver software, as shown in Figure 5

6, select from the computer device driver list, the next step. As shown in Figure 6 below

7, select the printer in the common hardware type, the next step. As shown in Figure 7 below

8, the left manufacturer chooses HP, the model of the right printer selects HP Laserjet 5200 Series PCL5, select the next step. As shown in Figure 8 below

9, a warning prompt appears, click Yes. The driver will be installed automatically. As shown in Figure 9 below

10, the installation is successful, click to close. As shown in Figure 10 below

11, at this time in the device and printer, the 5200 drive icon does not have a yellow exclamation mark, showing the HP Laserjet 5200 Series PCL5. Right-click the printer property on the icon, print in the lower right corner Test page. Check if the printer can print. As shown in Figure 11