First, the reason analysis
1, sometimes if the sound card driver is not installed in the program will also generate such a fault, such as landing beach battle, if the sound card driver is not installed, the operation will generate an illegal operation error.
2, the software is not compatible with each other;
3, may be the system file is changed or damaged. If this is triggered, some illegal system will appear when you open some programs that come with the system;
4, the driver is not installed correctly, such failures are usually displayed on the graphics card driver, sometimes open some pages A prompt for an illegal operation.
5, the quality of the memory is not good (sometimes increase the memory delay time will be the system default 3 to 2 can solve such failure).
Second, "Illegal operation" and the specific meaning and solution
1, stop number: 0x0000002E
Description text ATA-BUS-ERROR
Cause analysis: system memory parity error, usually Caused by hardware problems.
Workaround:
1) Remove all newly installed hardware (RAM.Adapters, hard drives, modems, etc.).
2) Run system diagnostic software provided by the computer manufacturer, especially hardware diagnostic software.
3) Disable BIOS memory options such as cache or shadow.
4) Make sure that the hardware device driver and system BIOS are the latest version.
5) Use system diagnostics provided by your hardware vendor to run a memory check to find faulty or mismatched memory.
6) When it appears as a list of systems after booting, press the F8 shortcut, on the Windows Advanced Options menu screen, select “Start VGA mode: then press Enter, if this does not solve the problem, It may be necessary to replace the list of different video adapters for a list of supported video adapters.
2, stop error number: 0x0000000A
Description text: IRQL-NOT-LESS-OR-EQUAL
Cause analysis: The driver used an incorrect memory address.
Workaround:
1) If you can't log in, restart your computer. If there is a list of available systems, press F8 to enter safe mode. On the Windows Advanced Options menu screen, select ” last time correct Configuration “, then press the Enter key.
2) Run all system diagnostic software, especially check memory
3) Disable or remove newly installed hardware (RAM, adapter, hard drive, modem, etc.), drivers or software.
4) Check that all new hardware or software is properly installed. If this is a fresh installation, contact the manufacturer of the hardware or software to obtain any Windows updates or drivers that may be required.
5) Disable BIOS memory options, such as cache or shadow
3, stop error number: 0x0000001E
Description text: KMODE-EXPTION-NOT-HANDLED
Cause analysis: Kernel mode process tried to execute an illegal Or unknown processor instructions.
Workaround:
1) Make sure there is enough space, especially when performing a new installation.
2) If the stop error message indicates a particular driver, then disable that driver.
3) If the computer cannot be started, enter safe mode at boot time to remove or disable the driver.
4) If you have a non-Microsoft supported video driver, try to switch to the standard VGA driver or the appropriate driver provided by Windows.
4, stop error number: 0x00000023 or 0x00000024
Description text: FAT-FILE-SYSTEM or MTFS-FILE-SYSTEM
Cause analysis: The problem occurs in Ntfs.sys (allows the system to read and write the driver of NTFS drive) Within the program file).
Workaround:
1) Run system diagnostic software provided by the computer manufacturer, especially hardware diagnostic software.
2) Disable or uninstall all anti-virus software, disk defragmenter or backup program.
3) Check the hard drive for damage by running the Chkdsk /f command at the command prompt and restart the computer.
5, stop error number: 0x00000058
Description text: FTDISK-INTERN-ERROR
The usual reason: a main drive in the fault-tolerant set has failed.
Workaround: Boot the computer using the Windows installation disk and boot from the image (2nd) system drive. For instructions on how to edit the Boot.ini file to point to the image system driver, search on the MIcrosoft Support Services Web site. Edit ARC path”.
6, stop number: 0x0000003F
Description text: NO-MOR-SYSTEM-PTES
Cause analysis: The driver has not been cleaned up properly.
Workaround: Disable or uninstall all anti-virus software, disk fragmentation or backup programs