CD installation win7 system steps, win7 system CD installation tutorial

Put the Windows7 installation CD into the CD-ROM drive, enter the BIOS when the computer starts and set the first boot device as the CD-ROM drive, press F10 to save the settings and exit the BIOS.
1. After the computer restarts automatically, the following figure will appear. Press any keyboard to start the computer from the CD-ROM drive.

2. The computer starts to load the installer file after booting from the CD-ROM drive

3. After the installer file is loaded, the Windows 7 installation interface appears, because the Windows 7 installation CD is Simplified Chinese, so here are all options. By default, click Next.

4. Click the Install Now button to start the installation.

5. The terms of the license agreement appear, in the "I accept the license terms" in front of the tick, and then the next step.

6. The installation type selection interface appears, because we are not upgrading, so choose the custom (advanced) option

7. The installation location selection interface appears, select the partition of the installation system here, if To partition or format your hard drive, click on Drive Options (Advanced).

8. Here you can partition the hard disk, you can also format the partition. After selecting the partition where the system is installed, click Next.
Because Windows 7 will automatically format the partition when it is installed, we can format the partition of the installation system here.

9. Windows7 starts to install.

10. After the installation is complete, the computer needs to be restarted.

11. Start updating the registry settings after the computer restarts.

12. Start the service.

13. At this time, it is only after the final completion of the installation phase.

14. After the installation phase is completed, the computer needs to be restarted.

15. After the computer restarts, the installer prepares for the first time using the computer.

16. Enter the username and computer name and click Next.

17. Set the password for the account. If you do not set a password here (leave blank), you will not be prompted to enter the password when the computer starts up, but enter the system directly

18. The system update method, it is recommended to select the recommended option.

19. Set the date and time of the computer.

20. Set the network location, there are three options: family, work and public. The home network is the most lenient, the public network is the most strict, and you can choose according to your actual situation.

21. Complete the settings.